UEI LP Pro Kit Combustible Gas Detector & EM151 Manometer (LPKIT) with Case

CD100A Gas Leak Detector Features:

• Fully adjustable (thumbwheel) steady tic rate accelerates as the sensor tip approaches a leak
• Tip light to illuminate area being tested
• Replaceable sensor
• Adjustable tick rate to locate leaks quickly
• Fast response time < 2 seconds to 40% LEL
• Long 18" gooseneck for hard to reach areas
• Visual leak detection by color-coded LED's
• Precision sensor detects even the smallest leaks
• Long, slim 18" gooseneck probe and bright LED tip light to find combustible gas leaks in tight areas
• Detects a wide variety of gases, including some toxic gases and nuisance vapors. The following represents only a portion of the more common gases it will detect:
  • Combustible
    • Natural Gas (Methane)
    • Gasoline
    • Propane
    • Jet Fuel
    • Tolulene
    • Ethylene oxide
    • Ammonia
    • Lacquer Thinner
    • Acetylene
    • Halon
    • Industrial Solvents
    • Naptha
    • Combustible Refrigerants
    • Butane
    • Alcohol
  • Other:
    • Steam
    • Hydrogen Sulfide
    • Smoke
    • Acetone Ammonia
• User adjustable alarm preset levels
• Adjustable tick rate & visual detection LED
• Headphone jack
• Low battery indicator

Specifications:

• Sensor: Solid state conductivity (semiconductor)
• Sensitivity: <50ppm methane in air
• Probe length: 18" obedient gooseneck
• Warm up time: Approx 10 seconds
• Response time: <1 second
• Duty cycle: Continuous
• Operating temperature: 32° to 122° F
• Operating humidity: 10 to 90% RH (non condensing)
• Power: (1) 9v alkaline battery
• Battery life: approximately 5 hours of continuous use
• Dimensions: 8" x 4" x 1.5" (add approx 1" to height & width to account for coiled cable)
• Weight: 17oz (with batteries installed)

Supplied with:

• Sensor cap with lighted tip
• Instruction manual
• Battery
• Rubber boot protects instrument (Ruggedized)
• 1 year limited warranty (sensor excluded)