The UEi THL1 to log temperature and humidity values for later analysis.
Verify cold storage requirements are being met, or test temperatures and
humidity for comfort analysis.
Features
- 32,000 data points (16,000 Temperature, 16,000 Relative Humidity)
- Sample rates, every:
- Seconds: 2, 5, 10 or 30
- Minutes: 1, 5, 10 or 30
- Hours: 1, 2, 3, 6, 12 or 24
- Analysis software with dew point calculation, charting of results, and
export to other file formats
- USB interface and Windows™ compatible software
- Instant or manual start
- Silabs C8051 F320 USB Board
- Alarm LED’s with user selectable values (10, 20 or 30 seconds)
- Magnetic mount
- Long battery life
Specifications:
- Relative Humidity Overall range 0 to 100%
- Humidity accuracy:
- ±3.0% at 40 to 60% RH
- ±3.5% at (20 to 40% and 60 to 80% RH)
- ±5.0% at (0 to 20% and 80 to 100% RH)
- Temperature range: -40° to 158°F (-40° to 70°C)
- Temperature accuracy:
- ±1.8°F at 14° to 104°F
- ±3.6°F at (-40° to 14°F and 104° to 158°F)
- ±1°C at -10° to 40°C
- ±2°C at (-40° to -10°C and 40° to 70°C)
- Dew Point Temperature range: -40° to 158°F (-40° to 70°C)
- Dew Point accuracy: ±4.0°F (2.0°C) at (25°C and between 40 to 100% RH)
- Logging Rate Selectable sampling interval: 2s, 5s, 10s, 30s, 1m, 5m,
10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr and 24hr
- Operating temperature range: -31° to 175°F (-35° to 80°C)
- Battery type: 3.6V lithium (Size: 1/2AA) (SAFT LS14250,
BFM XL-050F ER14250H or
equivalent)
- Battery life: approximately 1 year depending on logging rate, ambient
temperature and use of alarm LEDs
- Dimensions: 4" x 1" x .75"
- Weight: 172 g (6 oz)
Supplied with:
- 3.6v Lithium battery
- Wall mount
- Magnetic mount
- Windows™ compatible analysis software with dew point calculation
- One year limited manufacturer's warranty
Download User's Manual (PDF format)
Sensor Reconditioning Over time, the internal sensor may be
compromised as a result of pollutants, chemical vapors, and other environmental
conditions which can lead to inaccurate readings. To recondition the internal
sensor, please follow the procedure below: Dry the logger at 176°F (80°C) at <5%
RH for 36 hours followed by 70° - 90°F (20° - 30°C) at >74% RH for 48 hours (for
re-hydration). If permanent damage to the internal sensor is suspected, replace
the Logger immediately to ensure accurate readings. |
