Oscilloscope: Digital (V-K7105) True RMS, dB, Peak-to-Peak and DC Voltage

Non-stocked item. Please allow 7 to 10 days for delivery.

This handheld scope features options never seen in its category. It is packed with handy features which enables you to perform on-the-spot measurements quick, easy and accurate. Its high-contrast, wide viewing angle LCD screen enables operation under normal daylight conditions. All functions are accessible by means of a tactile keyboard with a pleasant touch feeling. The current operating mode is displayed on-screen. If desired, auto-setup mode takes care of all scope settings for instant visualization of waveforms. The marker function enables you to make accurate measurements of voltage, time and frequency. Acting as a DVM, it displays True RMS, dB, peak-to-peak and DC volts. With its built-in variable gain sine generator, it allows easy service of audio equipment, etc.… Probe transient response can be adjusted using the calibration output. Finally, a RS232 port enables screen data to be sent to a PC for use in different applications. A charge circuit with indicator LED for rechargeable batteries is provided.

Features:

• true RMS or peak to peak read-out
• dB measurements
• markers for voltage and time
• auto setup function
• DC readout with zero reference function
• frequency readout through markers
• dot join function
• screen hold function
• grid or ruler function
• adjustable trigger level
• trigger mode: normal, auto or single
• trigger edge: rising or falling
• waveform memory (1 location only)
• RS232 data output to computer
• auto power off (can be disabled)

Specifications:

• maximum sample rate for repetitive signals: 5MHz
• maximum sample rate for single shot events: 0.5MHz
• input impedance: 1Mohm // 20pF
• maximum input voltage: 100Vp (AC + DC)
• input coupling: DC, AC and GND
• vertical resolution: 8 bit (6 bits displayed on LCD)
• dB range: -73dB to +40dB
• linearity: 1 bit (of 8 bit data)
• LCD: 64 x 128 pixels
• timebase: 2µs to 20s / div in 22 steps
• input sensitivity: 5mV to 20V / div in 12 steps
• sinewave generator: 400Hz / 1Vrms // 1Kohm (adjustable)
• square wave output: 400Hz 3.5Vpp
• power supply: 9VDC / 300mA
• rechargeable battery: 6 x type AA / 800mAh
• charge current: 90mA
• charging time: 14 hours
• autonomy: 5 hours
• operating temperature: 32°F to 122°F
• dimensions: 5.1 x 9.1 x 1.7"

Non-stocked item. Please allow 7 to 10 days for delivery.