|
CD100A Gas Leak Detector Features:
- Fully adjustable (thumbwheel) steady tic rate accelerates as the sensor
tip approaches a leak
- Tip light to illuminate area being tested
- Replaceable sensor
- Adjustable tick
rate to locate leaks quickly
- Fast response
time < 2 seconds to 40% LEL
- Long 18"
gooseneck for hard to reach areas
- Visual leak
detection by color-coded LED's
- Precision sensor
detects even the smallest leaks
- Long, slim
18" gooseneck probe and bright LED tip light to find combustible gas leaks
in tight areas
- Detects a wide variety of gases, including some toxic gases and nuisance
vapors. The following represents only a portion of the more common gases it
will detect:
- Combustible
- Natural
Gas (Methane)
- Gasoline
- Propane
- Jet Fuel
- Tolulene
- Ethylene oxide
- Ammonia
- Lacquer
Thinner
- Acetylene
- Halon
- Industrial Solvents
- Naptha
- Combustible
Refrigerants
- Butane
- Alcohol
- Other:
- Steam
- Hydrogen
Sulfide
- Smoke
- Acetone
Ammonia
- User adjustable
alarm preset levels
- Adjustable tick rate & visual detection LED
- Headphone jack
- Low battery indicator
Specifications:
- Sensor: Solid state conductivity (semiconductor)
- Sensitivity: <50ppm methane in air
- Probe length: 18" obedient gooseneck
- Warm up time: Approx 10 seconds
- Response time: <1 second
- Duty cycle: Continuous
- Operating temperature: 32° to 122°
F
- Operating humidity: 10 to 90% RH (non condensing)
- Power: (1) 9v alkaline battery
- Battery life: approximately 5 hours of continuous use
- Dimensions: 8" x 4" x 1.5" (add approx 1" to height & width to account
for coiled cable)
- Weight: 17oz (with batteries installed)
Supplied with:
- Sensor cap with lighted tip
- Instruction manual
- Battery
- Rubber boot protects instrument (Ruggedized)
- 1 year
limited warranty (sensor excluded)
EM151 Digital Manometer Features
- Single Input measures
positive and negative pressure to 20" WG (water gauge)
- Auto power off after 5
minutes of no activity
- Rubber-boot (ruggedized)
with built-in magnet
- Simple 2 button operation
- Measures in inches water gauge
- Time-saving alternative to
U-tube pressure measurements
- One year limited warranty
- MIN/MAX value capture
- Data hold
- Back-lit display
Specifications:
|
|
Range |
Resolution |
Accuracy |
1 psi
= |
|
inch of h2o
(WG) |
±20" |
0.01
at ±10
0.1 at <-10" and >+10" |
±0.02”WG at <2"
±1% at >2" |
27.680517 |
|
mbar |
±50 |
0.01 |
68.948253 |
- Operating range: 32° to 104° F (0 to 40° C)
- Operating humidity: 10 to 90% RH
non-condensing
- Power: 1 9v battery (included)
- Battery Life: Approx 50 hours with alkaline
battery
Supplied with:
- 2 pieces of 3/8" tubing
- Instruction manual
- 2 3/8" brass fittings (BF100)
- 9v alkaline battery
- 3 years limited
manufacturers warranty
Optional: Padded UEI Carrying Case (AC319)
with Inside Pocket & Carrying Strap
Link to Pressure Conversion Calculator (must have JAVA enabled)
Download Users Manual (PDF format)
|
