THIS ITEM IS NO LONGER AVAILABLE.
DISCONTINUED BY MANUFACTURER.
Link to Replacement Item
The following links, images and information
remain available for informational purposes only.
Our electronic radon detector/monitor is
a proven performer being in service since 1996. Used by inspectors, consultants
and homeowners to monitor the radon gas levels in schools, offices and
residences. It is a solid state continuous radon monitor which utilizes patented
technology. At the heart of the device is a measurement circuit and pulse
processing software which records alpha events on a photovoltaic sensor. Radon
daughters create a spark when they come in contact with the potential across the
collection dome and the photovoltaic sensor counts these pulses. The software
equates pulse volume into pCi/L (Pico Curies per Liter) and then displays
the information on the LED display. Since there is no offal from a pulse event,
this measurement device requires no periodic calibration.
120v AC / 60Hz at
18v DC / 200mA
than whole numbers round down (3.9 = 3 displayed)
0°C (32°F) to
-20°C (-4°F) to
85dB at 10cm.
Beeps every hour if long-term readings are 4 pCi/L or greater.
Levels will be
updated on the display every hour.
Average over the
past 7 days.
Average from the
time of last reset (5 year max) resets after 5 years.
+/- 12% pCi/L
(click her to
see accuracy report in PDF format)
4.7" x 3.1" x 2.1"
InspectUSA.com - Distributors of TestKits, Inspection Gear & Safety Equipment.
eMail with suggestions, product inquiries or comments. Thank you.