Full Case Lots of 80 per case
The Water Leak Alarm
with Remote Sensor is a self-contained electronic device to sound an alarm when
the sensor is in contact with water. The electronic horn alarm is set off
immediately when the sensor (on a 6' wire) comes in contact the water or
moisture. The sensor can be used in a variety of methods depending on your
application. It has an endless number of uses and can save customers
thousands of dollars in water damage.
For unattended filling of bathtubs, pools, spas etc.
at the point where you want to be alerted.
under refrigerator, freezer, air handler etc.
Ideal under hot water heater, washing machine, dishwasher, or as a sump pump
Storm sewer backup and basement leaks
Accumulation of water in bilges or condensation
Can be used
portable or mounted in a fixed position
Designed to alert
you of overflows, leaks or water trouble.
sensor with a 6' sensor wire and suction cup
Loud (approximately 75 to 85
dB) alarm (sounds for approximately 36 to 60 hours)
The connector has screw on wires so you can route the wires through small areas
first, then connect it to the alarm. If it is soldered direct to the unit it
would limit some of the applications because of the size of the sensor.
(LED) and loud audible alarms
Power: 9 volt
for conventional 9 Volt adapter
InspectUSA.com - Distributors of TestKits, Inspection Gear & Safety Equipment.
eMail with suggestions, product inquiries or comments. Thank you.