Battery Tester: Analog (VTTEST7) with Test Leads

Model #: VTTEST7
This item No Longer Available.  eMail sales at for additional information or replacement product advice.

Switch to Desktop View

Print Friendly View
Click Here to Contact Us for the replacement part number and pricing Battery Tester: Analog (VTTEST7) with Test Leads
Click to Enlarge

First Product Previous Item Product 8 of 18 Next Item Last Product
Category Chargers & Adapters
  • Battery sizes:
    • button cells: 1.5V/1mA
    • AA and N: 1.5V/50mA
    • C and D: 1.5V/150mA
    • lithium cells: 3V/1mA, 6V / 10mA, 9V/10mA, 12V/10mA, 15V/10mA, 22.5V/10mA
  • Dimensions: 3.9" x 2.5" x 1.3"
  • Weight: 3.0oz


  • Select the correct battery type and voltage with the recessed range switch. Examples:
  • Move the range selector to the position labeled "1.5V AA-C-D" if you wish to test AA-, C- or D-batteries of 1.5V
    • select the "9V"-position to test rectangular 9V-batteries
    • select the "BUTTON CELL 1.5V"-position to test mercury, silver or alkaline button cells
    • select the "LITHIUM 3V"-position for lithium button cells
    • select the "1.5V AA-C-D"-position to test nickel cadmium batteries of 1.25V and read the value on the lowest of the three scales on the analogue display.
  • The value indicated on the meter is the load current drain placed on the battery during the check.

CAUTION: Selecting the wrong range will yield inaccurate results. You may also damage the device in the process.

  • Place the red probe tip (+) against the positive (+) battery terminal and the black probe tip (-) against the negative (-) battery terminal.

CAUTION : Mind the polarity indications when testing your batteries!

  • Select the correct range (see above). Use the following procedure to test your batteries:
    • Place the battery's negative (-) terminal against the VTTEST7's negative (-) contact and touch the battery's
      positive (+) terminal with the red probe tip (+)
    • In order to test rectangular 9V-batteries : place the battery's negative (-) terminal against the VTTEST7's negative (-) contact and place the battery's positive (+) terminal against the VTTEST7's positive (+) contact
    • In order to test button cell batteries: insert the battery in the slot on the side of the device. Make sure the negative (-) pole is facing up and press the brown switch on the front panel.

CAUTION : Observe the following safety prescriptions in order to avoid all damage to the button cell being tested:

  • Do not push the brown switch when using the probe tips to test a button cell.
  • Do not allow the red probe tip (+) to contact the black probe tip (-) when using the 9V-contacts to test button cells.
  • Read the analogue display to determine the condition of the battery.
    • Use the upper scale ("REGULAR") for measuring regular zinc carbon and alkaline batteries.
    • Use the centre scale ("BUTTON CELL - LITHIUM") for measuring mercury, silver oxide, alkaline and lithium button cells.
    • Use the lower scale ("NICKEL CADMIUM") for measuring rechargeable nickel cadmium batteries
Search Category: Hardware > Tools

Air Quality - IAQ

Anemometers-Air Flow

Carbon Monoxide (CO)

EMF / Microwave Meters

Fire and Smoke Safety

Food Safety & Hygiene

Gas and Leak Detectors

Heat Detector Testing

Infrared Thermometers

Inspection Supplies

Light, LUX, UV Meters

Manometers / Pressure

Measuring Instruments

Meter Accessories
|_Chargers & Adapters
|_Instrument Cases
|_Parts and Supplies
|_Power Adapters
|_Probes & Leads
|_Software & Cables

Moisture Detectors

Power & Circuit Testers

Radon Mitigation & Fans

Radon Testing & Supplies

Refractometers - BRIX

Safety and Security

Smoke Trace Emitters

Soil & Grain Meters

Sound Level Meters

Specialty Instruments

Temperature & Humidity

Timers and Clocks

Tools and Hardware

Water & Flood Alarms

Water Testing

Outlet / Clearance
Quick Find

Search Catalog:

Advanced Search
eMail Address:
Forgot Password?
Password Reset
Customer Reviews Click for the BBB Business Review of this Mail Order & Catalog Shopping in Marshall NC
Customer Service Radon Results Lookup
About Us Carbon Monoxide Gas
Shipping Policy Conversion Calculators
Return Policy Copyright & Trademark
Privacy Notice SPECIALS
Conditions of Use Radon Gas Information
Contact Us CO Detector Badge

Your IP Address is:
Copyright Inspect USA®. All rights reserved. 1995-2020
No part of this website may be reproduced without our express consent.
Distributors of TestKits, Inspection Tools, HVAC Smoke & Food Safety Equipment.