Meters, Test Kits, Inspection Supplies & Tools!

Cable & Wire Length Meter 26 to 4/0 AWG (CLM100) with Case

Model #: CLM100

UPC: 0053533503289

Condition: New


Add Qty to Cart:
Product 5 of 16

Cable & Wire Length Meter 26 to 4/0 AWG (CLM100) with Case

The UEI CLM100 Digital Cable and Wire Length Meter is an excellent tool to measure spooled or wound cable or wire. Built solid and supplied with a Ruggedized boot for reliable performance in the field. Currently being utilized by major utility companies, electrical contractors, wholesalers, installers any many others to get quick inventory calculations or measurements to account for the amount of wire/cable installed in a given period, job or day. It is very accurate and easy to use. Simply attach the Kelvin Clips to both ends of the cable. Adjust the indicator to the size wire you are measuring and that's it. A temperature compensation circuit ensures accuracy by compensating for the temperature of the wire.
  • Large 4 digit LCD display with enunciators
  • Measures in feet and meters
  • Easy to use and calibrate
  • Measures copper and aluminum cable, covers the major wire types
  • Auto power off (after being idle after 15 minutes)
  • Automatic temperature compensation
  • Low battery indicator
  • Milli-ohm measurement capability
  • User calibration mode (calibration standard included)
  • Identifies high-resistance connections


Wire Size: 26 to 4/0 AWG (250 to 500 MCM)
Measuring Length: 15 to 30,000 feet (5-9144m)
Operating Temp Range: 32° to 104°F (0° to 40°C)
Operating humidity: 20 to 80% RH non-condensing
Accuracy: within (2% of reading + LSD) at 65° to 75°F
within (3% of reading + LSD) at below 65° and above 75°F
*LSD = Least Significant Digit
Temp Compensation: Automatic
Resistance Range: 0 to 65 ohms
Resolution: 0.5 feet (0.1m Length) 1 milliohm resistance
Power: 9 volt battery
Auto power off: After approximately 5 minutes
Battery life: Typically 40 hours (90 hours in Sleep Mode). Extended measurements can lower battery life
Supplied with:
  • 2 (easy-to-attach) Kelvin Clips on pre-calibrated leads (approx 4' long)
  • Ruggedized boot with clips
  • Copper calibration bar for automatic calibration
  • Abrasive pad to remove oxidation
  • Rugged carrying case
  • Battery
  • Owners manual
  • 5 year limited manufacturers warranty

Download Owner's manual (PDF 470kb)

Search Category: Hardware > Tools > Measuring Tools & Sensors

What our customers say...

I just had to stop by to thank you for so much time this meter is saving us. What used to take days now takes hours. Very accurate & easy to use.

Rated by B. Goodman

Thank you so much. I found the calibration bars in the lid just as you stated, so we are all set. I tested a coil of MC cable that is supposed to be 1,000’. (We cut one just like it into 8’ pieces and got 120 pieces or 960’.) The meter read 968’, which is extremely accurate. Thanks also for responding so promptly and cheerfully each time regardless of how cranky I was getting.

Rated by Howard Hess

Rated by stephen d.

Rated by R. Sandstorm

Rated by David Strong

this meter saves thousands of dollars in time & material.

Rated by Tyler Electric
Product 5 of 16
0 items
Manufacturer Info