Meters, Test Kits, Inspection Supplies & Tools!

CO and CO2 Analyzer Kit (C20) UEI C20 with Flue Probe & Case

Model #: C20

UPC: 053533506211

$539.95 $469.00

Add Qty to Cart:
Product 13 of 19

UEI C20 Combustion Analyzer Kit measure both Carbon Monoxide and Carbon Dioxide with Built-in Pump

The meter gives a quick, continuous readout of the combustion process. Readings change in real-time as adjustments are made to help zero in on the proper setting.

  • Measures: Carbon Monoxide CO in part per million (ppm)
  • Measures Carbon Dioxide CO2 in percentage volume (%)
  • Maximum CO reading
  • Inline water trap
  • Real time analysis
  • EOS technology sensor direct CO2 Measurements No Sensor Replacement 10 Year Life Expectancy
  • Direct CO Measurements
  • Temperature range:
    • Flue Temperature 32-1112˚F (0-600˚C) 1.0˚F ±(2%RDG ±3.6˚F(2˚C))
    • Net Temperature2 32-1112˚F (0-600˚C) 1.0˚F ±(2%RDG ±3.6˚F(2˚C)
  • Carbon Monoxide (CO) range: 1 to 1999ppm with 1ppm resolution and accuracy within 5ppm at below 100ppm and within 5% of reading over 100ppm
  • Carbon Dioxide (CO2) range (using dry gases as STP): 0 to 30% with 0.1% resolution and accuracy within 0.3%
  • Operating temperature: 32° F to 104° F
    NOTE most batteries are not rated for below -4° F or above 125° F
  • Operating humidity: 10 to 90% RH, non condensing
  • Operating atmospheric pressure: 850-1100mmHg
  • Power: (4) AA alkaline batteries or equivalent
  • Battery life: approximately 8 hours or more
  • Dimensions:
    • Meter: 7” x 3 1/4” x 2", (with boot): 8" x 4" x 2.5"
    • Probe: 10” stainless steel shaft with approximate 36” neoprene hose
  • Weight: approximately 16 ounces with batteries installed

Supplied with:

  • Flue probe (KMCP72)
  • Protective boot with integral magnet (SBOOT)
  • Soft carrying case (AC73)
  • Instruction manual (download PDF)
  • 5 Year limited manufacturers warranty

Search Category: Hardware > Tools > Measuring Tools & Sensors

Product 13 of 19
Manufacturers