Protimeter 4 Way Moisture Analysis Kit (BLD8800C) with Hard Case
$1,276.00
-
Available to ship on or before:08/26/2022
The most complete moisture meter and detection system with Hard Case, software and data connect cable.
- Electrode pin moisture measurement
- Pinless, non-invasive moisture measurement
- Non-contact Infrared thermometer for surface temperature measurement
- Fast responding relative humidity and temperature measurement
- Fast responding hygrometer speeds up building surveys
- No need to plug in multiple accessories
- Intuitive user interface with color screen
- Data logging
- Firmware upgradable
- Built-in psychrometric calculations
- Surface non-contact temperature measurement with laser pointer
- Measures moisture in wood and wood floors, drywall, concrete and concrete
block, stucco, plaster, masonry and other building materials.
-
Measure (pin mode) diagnoses the extent of moisture intrusion for damage
assessment and monitor drying out of building structures.
- Use built-in pin or plug in the heavy duty moisture probe for measuring
in hard-to-reach areas
- Use deep wall pin-type probes to measure moisture in walls, wall cavity
insulation, sub and surface structures
- Use accessories such as hammer probes to measure at depth
- Search (non-invasive mode) behind ceramic tile, fine finishes, water stains,
tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and
concrete block.
- Non-invasive pinless radio frequency finds moisture up to 3/4" (19 mm)
- Search mode not adversely affected by surface moisture
- Hygrometer measures or monitors buildings for adequate ventilation affecting
indoor air quality and moisture problems.
- Measures relative humidity and temperature, dew point and surface
temperature, surface proximity to dew point (condensation) and grains per
pound, as well as multiple psychrometric calculations
- Allows measurement of equipment such as dehumidifiers
- Measures equilibrium relative humidity in concrete floors using the in
situ probe method
- Use to detect conditions for mold and fungus growth, that can lead to
unhealthy living conditions
-
Surface Temperature (IR) checks surface temperature, utilizing laser pointer,
calculates proximity to dewpoint
Specifications:
- Moisture Measurement Range:
- Pin % WME) 8% to 99, readings over 30% are relative
- Non-invasive (RF) up to 3/4" (19mm) deep 60 to 1000 (relative)
- IR Surface Temperature Probe Range: 15° to 120°F (-10° to 50°C)
- Infrared Surface Temperature Range: IR Based With 12:1 (D:S) Ratio
- Range -4°F to 176°F (-20°C to 80°C)
- Accuracy ±3.6°F (±2°C)
- Quikstick ST Data (Nominal)
- 0% to 10% RH, ±3% RH at 68°F (20°C),
- 10% to 90% RH, ±2% RH at 68°F (20°C),
- 90% to 100% RH, ±3% RH at 68°F (20°C),
- Range 32°F to 122°F (0°C to 50°C) ±0.6°F (±0.3°C)
- Nominal response 30% to 90% and back to 30% RH in 45 seconds @ 68°F (20°C)
- Data Storage: Store up to 8,000 results with date and time stamp from all instrument functions with the push of a button.
Store 6100 results with automatic logging.
- Maximum Needle Depth: 0.4" (10mm)
- Display: Color LCD
- Battery: 9v (included)
- Weight: 10oz (283g)
- Dimensions (LxWxH): 7.5" x 3.7" x 2.2 (190.5 x 94 x 56mm)
Supplied with:
- Hard Shell ABS Padded Instrument Case BLD5910
- (1) Quikstick ST Sensor POL8751
- (1) Heavy Duty External Probe BLD5060
- (2) Spare Pins BLD500
- Calibration Check Device BLD5086
- Logging Software & Cable BLD7758
- 2 Year limited manufacturers warranty
Search Category: Hardware > Tools > Measuring Tools & Sensors > Moisture Meters