Meters, Test Kits, Inspection Supplies & Tools!

Smoke Check Smoke Detector Test 1/2oz (SAT1) 12 Tests

Model #: SAT1

This item is No Longer Available

No Longer Available
Product 23 of 23

Description | Specifications/Features | FAQ | Related Products | Uses | Blog | Manual

Description

Smoke Check™ smoke detector tester in a ½ ounce promotional size can perform approximately 12 tests and fits in a shirt pocket. To learn more about Smoke Check™ smoke detector tester please visit 2.5 Ounce Smoke Check™.

Please Note: Pressing the "test button" on a smoke detector tests battery strength only. The test button cannot be used to verify the smoke detector's ability to activate its alarm in the presence of smoke caused by a fire. Smoke Check™ Smoke Detector Tester was designed specifically to verify the smoke detector's proper functioning.

TOP

Specifications & Features

  • Over 12 Smoke Detector Tests Possible Per Can
  • Contents Net Weight - 0.5 oz
  • Contains No Hydrofluorocarbons (HFCs)
  • 100% Ozone Safe
  • Smoke Check™ is UL Listed (per NFPA 72 par. 8-2.4.1)
  • Due to Federal Law, Smoke Detector Tester Smoke in a Can cannot be shipped via the US Postal Service or by any Air Method.
  • Made in USA
  • Smoke Detector Tester (Model SAT-1) may only be shipped within the continental United States.
  • Manufacturer Provides 100% Life Time Guarantee

Material Safety Data Sheet for Smoke Detector Tester Click to View the Material Safety Data Sheet (MSDS) (The Adobe Acrobat .pdf file will open in another window.)

Product Certifications

TOP

FAQ

  1. What is the best way to utilize Smoke Detector Tester? - Building/facilities/transportation support technicians, home/condo owners and apartment residents should establish routine procedures to inspect, clean, test and replace batteries in smoke detectors on a quarterly basis. Maintenance and testing should be performed more frequently in areas with large quantities of airborne particulates such as factories or restaurants.

    Please Note: If the smoke detectors being tested are part of a centrally monitored alarm system, please notify the monitoring company PRIOR to testing that a test is scheduled and for what period to prevent the local Fire Department from being unnecessarily deployed.

TOP The following products are recommended for use with Smoke Detector Tester. Also, consider purchasing Smoke Detector Tester by the 288 pack case (Model #SAT-288) or pallet (Model #SAT-5760). Buying canned smoke in bulk is the most cost effective strategy as large quantity discounts apply. TOP

Uses

Smoke Detector Tester ½ oz size can be used in a variety of ways as shown below:
  • Fire Departments can distribute ½ oz sample cans throughout their service areas to promote fire awareness and safety.
  • Fire safety professionals can setup demonstrations for proper smoke detector handling in schools and other public events. ½ oz Smoke Check™ is an inexpensive hand-out.
  • HVAC technicians, plumbers, electricians and home inspectors can use ½ oz Smoke Check™ as a leave behind thank you gift to customers..
  • Give employees have Smoke Detector Test in their homes.
  • ½ oz Smoke Check™ is perfect for home owners and apartment residents to safely verify their smoke detectors are functioning.
  • Donate ½ oz Smoke in a Can to schools, hospitals, churches and other not for profit organizations. Use press releases to advertise these good works sponsored by your company.
TOP

Blog

Visit the InspectUSA.com Blog to learn more about enhancing workplace and home safety.

Manual

Please follow the instructions shown below for servicing your smoke detector and the proper use of Smoke Detector Tester.
  1. Clean smoke detector by using DustAir™ Smoke Detector Cleaner or use a clean cloth and gently remove dust and any foreign matter.
  2. Press test button to verify the battery is operating. Replace smoke detector batteries at least every six months.
  3. Remove cap and from a distance of between 2' and 4' aim spray for 1 to 2 seconds at the vents or side of the smoke detector.
  4. Alarm should sound within 1 to 10 seconds if the detector is functioning properly.
  5. Smoke detectors with delay circuits should be sprayed an additional 1 or 2 times to activate the alarm.
  6. Remember, as stated above, if the smoke detectors being tested are part of a centrally monitored alarm system, please notify the monitoring company PRIOR to testing that a test is scheduled and for what period to prevent the local Fire Department from being unnecessarily deployed.

Material Safety Data Sheet for Smoke Detector Tester Click to View the Material Safety Data Sheet (MSDS) (The Adobe Acrobat .pdf file will open in another window.)

TOP

Search Category: Home & Garden > Fire & Gas Safety > Smoke Detectors

What our customers say...

Rated by Noah C.
Product 23 of 23
Manufacturers