Standard Speed Series
Moisture measurements are obtained by following a simple test procedure:
- Prepare and weigh the material sample using the electronic balance.
- Place the sample in the Speedy vessel.
- Add the reagent to the recess in the Speedy cap and seal the vessel.
- Shake the Speedy to mix the reagent with the sample.
- Read the moisture content directly from the integral gauge.
Building Restoration and Refurbishment
Building surveyors involved with diagnosing the cause of dampness in
buildings use the Speedy tester to determine the moisture level in walls and
floors. The Speedy complements moisture meters and hygrometers that are also
used for diagnosis.
Solid Floors
If moisture related floor failures are to be avoided, concrete slabs,
cementitious screeds and anhydrite screeds have to be in a dry condition before
decorative floors finishes including wood, vinyl and carpet are laid. The Speedy
tester is used to measure the moisture content of a sample of material removed
from the floor before the decorative finish is laid.
Specifications:
- Standard Speedy vessel fitted with calibrated pressure gauge, electronic
balance, heavy duty carry case with fitted foam inserts, cleaning brush and
cloth, measuring scoop and instructions.
- Nominal gross weight: 12.1lb (5.5Kg)
- Nominal gross dimensions: 20 x 15 x 8" (510 x 380 x 200mm)
- For 0 - 5% range: 10g - For 0 - 10% range: 12g - For 0 - 20% range: 6g
- Maximum sample size: 0.4" (10mm)
- Moisture measurement range expressed as a percentage of the wet weight
of the sample: Model F-S2000C: 0 - 10%, Model F-S2000D:0 -20%
F-S2000D - Standard size Speedy vessel
0-20%mc range, 6 gram sample
Note: Calcium carbide reagent not included
Supplied with :
- Calibrated pressure gauge
- Electronic balance
- Heavy duty carry case with fitted foam inserts
- Cleaning brush and cloth
- Measuring scoop
- Instructions and spare seal
- One year parts and labor warranty
F-L2000G - Large size Speedy vessel
0-50%mc range, 20 gram sample.
Note: Calcium carbide reagent not included.
Supplied with :
- Calibrated pressure gauge
- Electronic balance
- Heavy duty carry case with fitted foam inserts
- Cleaning brush and cloth
- Two steel sample pulverizing balls
- Measuring scoop
- Instructions and spare seal
- Calibration certificate
- One year parts and labor warranty
F-S2000C - Standard size Speedy vessel
0-10%mc range, 6 gram sample.
Note: Calcium carbide reagent not included
Supplied with :
- Calibrated pressure gauge
- Electronic balance
- Heavy duty carry case with fitted foam inserts
- Cleaning brush and cloth
- Measuring scoop
- Instructions and spare seal
- One year parts and labor warranty.