Ammonia h2o Test Kit

This Nessler based ammonia test kit reads the the total ammonia level in parts per million (ppm) which are equivalent to milligrams per liter (mg/L) from 0.0 to 8.0 ppm and includes enough reagent for approximately 130 tests.

Test Kit Includes:

Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).

2. Add 8 drops from Ammonia Test Solution Bottle #1, holding the dropper bottle upside down in a completely vertical position to assure uniformity of drops added to the water sample.

3. Add 8 drops from Ammonia Test Solution Bottle #2, holding the dropper bottle upside down in a completely vertical position to assure uniformity of drops added to the water sample.

4. Cap the test tube and shake vigorously for 5 seconds. Do not hold finger over the open end of the tube, as this may affect the test results.

5. Wait 5 minutes for the color to develop.

6. Read the test results by matching the test solution against the Ammonia Test Color Chart. The tube should be viewed against the white area beside the color chart. Color comparisons are best made in a well-lit area. The closest match indicates the ppm (mg/L) of ammonia in the water sample. Rinse the test tube with clean water after each use.

DANGER HARMFUL CORROSIVE C Bottle #2 contains sodium hydroxide and sodium hypochlorite