Get $5 off on $99+ purchase - Use Code HOT26

Force Gauge Tension & Compression 100Kg (FG-6100SD) DataLogging

Name: Force Gauge Tension & Compression 100Kg (FG-6100SD) DataLogging
Brand: Lutron Instruments
SKU: 2711
Price: 549.00 USD
Availability: BackOrder
Rating: 5.00 (111 reviews)

Model #: FG-6100SD

UPC: 00810106423043

Condition: New

0 Reviews
Be the first to review this product

Print This Page

Have a question?

Force Gauge Tension & Compression 100Kg (FG-6100SD) DataLogging

Item may vary slightly from image.

$549.00

Available to ship on or before:10/12/26 - 10/26/26

Available Options

Special Order

Add Qty to Cart:

6 × AA batteries

Product 10 of 11

Category: Torque / Force Meter

Lutron FG-6100SD Force Gauge, 100 kg, Tension and Compression with SD Card Data Logging

The Lutron FG-6100SD is a 100 kg force gauge with a built-in SD memory card data logger that records readings along with real time information. Saved data is read directly in Excel with no additional software required. Two recording modes cover both slow and fast events: normal mode samples from 1 second to 8 hours 59 minutes 59 seconds, while peak hold mode captures at sampling rates as fast as 10 ms. The gauge measures both tension and compression using a remote S-type load cell on a 2 meter cable, and is supplied with a carrying case.

SD card real time data recorder. Saved data downloads directly into Excel; no extra software is needed.
Two data record modes: normal mode and peak hold mode.
Normal record mode: sampling time settable from 1 second to 8 hours.
Peak hold record mode: fast sampling time settable from 10 ms to 500 ms.
Wide 100 kg capacity with high resolution, high accuracy and high repeatability.
Tension and compression (push and pull) capability.
Three display units: kg, lb, Newton.
Peak hold retains the maximum load on the display during tension or compression measurement.
Zero button operates in both normal measuring and peak hold operation.
Full capacity zero (tare) control capability.
Fast/slow response time push button.
Positive or reverse display direction select.
Large LCD display with back light.
Built-in low battery indicator.
Microprocessor circuit and exclusive load cell transducer.
Overload protection.
Low power consumption gives long battery life.
RS-232/USB computer interface.
Built-in DC 9V power adapter input socket.
Hand held and stand mounted operation; professional test stand available as an option.

Specifications

Display	LCD, 5 digits, 16 mm (0.63") digit size, with back light.
Display direction	Positive or reverse direction, selected by the push button on the front panel.
Function	Tension and compression (push and pull). Normal force and peak hold (maximum load).
Measure capacity	100 kg / 220.5 lb / 980.6 Newton
Resolution	0.02 kg / 0.02 lb / 0.2 Newton
Minimum display	0.15 kg / 0.35 lb / 1.4 Newton
Accuracy	± (0.5% + 0.1 kg) at 23 ± 5 °C, tested with 100 kg and 10 kg test weights.
Update time	Fast: approximately 0.2 second. Slow: approximately 0.6 second.
Peak hold	Freezes the display value at the peak (maximum) load.
Zero / tare control	Maximum full capacity. Operates in both normal force and peak hold measurement.
Unit select	kg, lb, Newton
Over range indicator	Display shows "- - - -" when in over range status.
Overload capacity	Max. 150 kg
Full scale deflection	Less than 1 mm
Sensor type	S-type load cell.
Circuit	Exclusive microprocessor LSI circuit.
Data output	RS-232/USB PC computer interface. The optional UPCB-02 cable provides the RS-232 plug; the optional USB-01 cable provides the USB plug.
Operating temperature	0 to 50 °C (32 to 122 °F)
Operating humidity	Less than 80% RH
Power supply	Alkaline or heavy duty DC 1.5V battery (UM3, AA) x 6 pcs, or equivalent. DC 9V adapter input (adapter optional).
Power current	Normal operation, without SD card saving and back light off: approximately DC 7 mA. With SD card saving and back light off: approximately DC 38 mA. Back light on adds approximately 3 mA.

Data Recording

Normal record mode sampling time	Auto data logger: 1 second to 8 hours 59 minutes 59 seconds. Sampling time can be set to 1 second, but memory data may be lost.
Normal record mode sampling time	Manual data logger: pressing the data logger button once saves one reading. Set the sampling time to 0 seconds. Manual mode can also select position (location) number 1 to 99.
Peak hold record mode sampling time	10 ms to 500 ms, in 10 ms steps. Auto data logger. The memory circuit stores a maximum of 1,000 readings.
Memory capacity	Normal record mode: 1 GB to 16 GB SD card. Peak hold record mode: 1,000 readings maximum.
Data error rate	0.1% of total saved data, maximum.
Memory card	SD memory card, 1 GB to 16 GB.
Advanced settings	SD memory card format; set clock time (year/month/date, hour/minute/second); set sampling time for normal record mode; set sampling time for peak hold record mode; auto power off management; unit setting; beep sound on/off; decimal point of SD card setting.

In normal record mode the measured value is saved to the SD card along with the real time value (year, month, date, hour, minute, second). Saved data is loaded directly into Excel for further graphic analysis; no extra software is required.

Dimensions

Main instrument	215 x 90 x 45 mm (8.5 x 3.5 x 1.8")
Sensor with two hooks	162 x 51 x 22 mm (6.4 x 2.0 x 0.9"), with a 2 meter cable

Weight

Main instrument	288 g (0.63 lb)
Sensor	635 g (1.40 lb)

Accessories Included

Operating manual, 1 pc.
100 kg sensor with 2 hooks and 2 meter cable, 1 pc.
Carrying case, 1 pc.

Optional Components

SD memory card, 4 GB.
RS-232 cable, UPCB-02.
USB cable, USB-01.
Data logging and data recorder software, SW-U801-WIN.
Excel data acquisition software, SW-E802.

Downloads

Link to the technical data sheet that is provided by the manufacturer

Download Users Manual (PDF format)

Lutron Certificate of Calibration Lutron Instruments & Solutions arrive brand new from Lutron with this factory calibration certificate enclosed. Until our chain of custody is broken we are certain and guaranty that every meter meets this standard at the time of shipment. InspectUSA would need to ship the new meter directly to your NIST lab, with our guaranty that it would meet NIST standards. We must ship the instrument direct to an approved NIST lab for this guaranty to be applicable. Once the chain of custody is broken for whatever reason, this guaranty is no longer valid.

ISO-9001 Certification

Search Category: Hardware > Tools > Measuring Tools & Sensors

Product 10 of 11

Category: Torque / Force Meter