Printing Specifications

Custom Imprinting Specifications General Terms

Over/Under-runs - Over-runs or under-runs will not exceed 5%. If a job is short, InspectUSA.com will provide a store credit toward any future purchases equal to the amount of the under-run. In the event of an over-run, the customer agrees to provide payment for the amount of the extra merchandise.

Artwork Proof - InspectUSA staff will work closely with the customer to ensure accuracy of the final printed products. For every custom imprinted job, a .pdf proof of the final artwork will be eMailed to the customer prior to printing. Customer must send eMail approval and acceptance of the proof within two business days of receipt. Customer accepts all responsibility for the accuracy of the final proof and acknowledges that InspectUSA bears no responsibility for any errors contained in the customer approved final proof or the resulting printed products.

Custom Imprinted Carbon Monoxide Detectors

Typical imprinting subject matter includes a logo or printed company name, web address and/or phone number. Other text may substituted according to sizing requirements shown below.

• Only the front of the detector may be imprinted as the obverse side contains user instructions (unless order exceeds 50,000 pieces).
• Logo images and artwork must have a resolution of 300 dots per inch or better.
• Maximum printable size is 1.9" wide x 1" high.
• Text should not be any smaller than 9 point.
• The following colors are standard on the detector:
  
  Gray - The color of the box used to record the opening date of the detector.
  Orange - The color of the ring around the silica sensor.
  
  These colors may be used in your logo or text along with up to two additional colors (for a total of four colors) from the Pantone or CMYK palettes.