Water Pump Pressure Switch (9013FYG2J2) Pumptrol 40 to 60 PSI

Square D Pumptrol, water pump switch 9013FY, adjustable, 40 to 60 PSI

• Pressure sensor type: Electromechanical pressure switch.
• Controlled fluid: Fresh water -22 to 257 °F (-30 to 125 °C).
• Adjustable range on rising pressure: 25 to 80 psi (172.37 to 551.58 kPa).
• Approximate adjustable differential: 20 to 30 psi (137.90 to 206.84 kPa).
• Destruction pressure: 220 psi (1516.85 kPa).
• Pressure actuator: Diaphragm.
• Pressure switch type of operation: Regulation between 2 thresholds.
• Scale type: Adjustable differential.
• Setting: Internal.
• Contacts type and composition: 2 NC, snap action, DPST-DB, Form YY.
• Cable entry number: 2 0.88 in (22.35 mm) cable entries with 0.84 in across flats UL 508.
• Electrical connection: Screw-clamp terminals 10 AWG Screw-clamp terminals 5.261 mm².
• Fluid connection type: 0.25 inch NPSF internal UL 508.
• Short-circuit protection: 20A cartridge fuse.
• Materials in contact with fluid: Zinc plated steel or equivalent flange, Nitrile (Buna-N) or equivalent rubber diaphragm.
• Material: Polypropylene Cover, Noryl thermoplastic resin or equivalent Cover.
• Operating position: Any position.
• Motor power kW: 1.5 KW (2 hp) 115 V AC, 1 phase, 2.2 KW (3 hp) 115 V AC, 3 phase, 2.2 KW (3 hp) 230 V AC, 1 phase, 3.7 kW (5 hp) 230 V AC, 3 phase.
• Electrical durability: 100000 cycles 10 cyc/min.
• Mechanical durability: 300000 cycles.
• Terminal block type: 4 terminals.
• Maximum operating rate: 10 cyc/min.
• [Ui] rated insulation voltage: 575 V UL 508.
• Product Weight: 1lb (0.45 kg).
• Accuracy: within 3 %.
• Width: 2.78" (70.61 mm).
• Height: 2.8" (71.12 mm).