Super Heat Sub Cool Meter (SSM1) T Fitting & Pipe Clamp Temp Probe

Product details (archived)

The information below is retained for reference only. This item is discontinued and cannot be ordered.

Use the SSM1 to directly measure superheat or subcool by direct connections for temperature and pressure. The SSM1 is programmed with the most common four refrigerants, with data from the NIST-Pro refrigeration database for temperature-pressure values.

Clamp the pipe temperature probe around the refrigerant line, and pressure to the service port, and the SSM1 will perform the calculations for you. A magnetic mount allows for hands free use, with a bright back-lit display to use in low light conditions.

• Measures pressure in PSI, BAR, KPA, Kg/cm2, InHg and cmHg
• Switch between °F or °C
• Calculates
  • Superheat for low side
  • Subcool for high side (TXV systems)
• Refrigerants included for calculations
  • R22
  • R134a
  • R404a
  • R410a

• Pressure sensing range: 0 to 500 psia (3450 kPa, 34.5bars)
• Pressure sensing resolution: 0.1psi (2kPa, 0.02bars)
• Pressure sensing accuracy: 0.5% FS ±1 least significant digit
• Temperature sensor range: -40° to 400°F
• Temperature Accuracy (at 18° to 28°C and humidity less than 75 % RH)
  • ±(1°F) -40° to 200 °F or ±(0.5°C) -40° to 93°C
  • ±(2°F):200° to 400°C or ±(1°C) 93° to 204°C
• Operating environmental temperature: 32° to 122° F (0° to 50°C)

Supplied with:

• ATTPC2 Pipe Clamp Temperature Probe
• T-fitting (allows refrigerant to be added or removed with the SSM1 connected)
• Users manual
• 3 year limited manufacturers warranty

Download Users Manual (PDF format)