USI Fire, Smoke & Carbon Monoxide Alarm (MIC1509S) Wall or Ceiling Mount

Product details (archived)

The information below is retained for reference only. This item is discontinued and cannot be ordered.

USI Fire, Smoke & Carbon Monoxide Alarm (MIC1509S) Wall or Ceiling Mount

Hardwired 10 Year Tamper Proof Permanent Power Sealed Battery Backup. 3-in-1 Smoke + Fire + Carbon Monoxide Smart Alarm

Manufactured date: 2020-06-10

• Universal Smoke Sensing Technology Provides the benefits of both photoelectric and ionization technology + Carbon Monoxide Detection in one alarm.
• No batteries to change ever.
• Tamper proof design provides a higher level of security to prevent battery removal.
• 10 Year Permanent Power gives a decade of peace of mind.
• Hardwired Alarm with 10 Year Permanent Power Sealed Battery Back-up.
• Maintenance Free Battery Back-up Power. No batteries to replace for the life of the alarm.
• Saves money. Never replace batteries for 10 years, saving up to $38.00 over the life of the alarm.
• Sealed battery eliminates annoying low battery chirps.
• 10 year sealed backup battery provide continuous protection even in the event of a power outage.
• 3-in-1 alarm protects against 3 deadly household hazards: Smoke + Fire + Carbon Monoxide.
• Smart Alarm Technology virtually eliminates nuisance alarms. Ideal for installation in EVERY room.
• Deactivation key switches alarm off and makes alarm safe for disposal.
• Lock-out feature prevents deactivated alarm from being reinstalled.
• Choose this alarm if you are looking for an alarm with superior nuisance alarm resistance.
• 10 year product end-of-service life warning sounds when it is time to replace alarm.
• This alarm is suitable for installation in houses, apartments, dormitory, hotels, & manufactured housing
  For maximum protection, install an alarm inside every bedroom, outside every sleeping area and on every level of the dwelling.
• Meet New Laws & Legislation. This alarm exceeds industry standards, and is ETL listed to UL 217 and UL 2034.
• ECO Friendly. Reduces environmental waste & eliminates disposal of up to twenty 9 volt batteries.
• Automatic temperature and humidity compensation continuously adjusts to variations in environmental conditions , reducing nuisance alarms.
• For added security, tamper-resistant locking feature prevents unwanted alarm removal.
• Perfect option for replacement or retrofitting applications involving existing USI or Universal brand alarms.
• Interconnectable with up to 24 compatible USI Electric and Universal Security devices.
• The larger mounting base covers drywall imperfections and old paint marks.
• 10 year limited manufacturers warranty on both battery and alarm

This alarm can be interconnected with the following models and accessories: MDSCN111, MICN109, MCN108, USI-1103, USI-1203, USI-1204, USI-1208, USI-1209, USI-1213, USI-5204, USI-3204, 5304, MI106, MDS107, MP117, USI-2430, USI-960, MI106S, MIC1509S, MPC122S, MP116S, SLW127, AMIC1510S, AMI1061S.

When any one of these interconnected models sounds, it will trigger the corresponding alarm within the interconnected system with respect to their sensing capabilities. Natural gas detection is only present in models MDSCN111, MICN109 and MCN108, therefore a natural gas alarm will NOT trigger the alarm of non-natural gas sensing models within an interconnected system.

The following alarms can trigger Quick Find Alarm Origination, but will not indicate Alarm Origination on an interconnected system: USI-1103, USI-1203, USI-1204, USI-1208, Part USI-1209, USI-1213, USI-5204, USI-3204, USI-7795, USI-2430. The following alarms cannot be reset through an interconnected system: USI-1103, USI-1203, USI-1204, USI-1208, USI-1209, USI-1213, USI-3204, USI-2430, USI-7795.

NOTE: Alarms without battery backup will not respond during an AC power failure. Interconnected CO alarms or CO alarm circuit of combination smoke and CO alarms will only respond if a CO alarm/event initiates the alarm. All other alarms remain silent. Interconnected smoke alarms, heat alarms and relay modules will only respond if a smoke alarm/event or heat alarm/event initiates the alarm. All CO alarms remain silent.

IMPORTANT: The USI relay module model USI-960 will not respond if a CO or gas alarm/ event initiates the alarm and it will not respond during an AC power failure.