USI CO, Smoke & Methane Alarm (MICN109) Wall or Ceiling Mount

Product details (archived)

The information below is retained for reference only. This item is discontinued and cannot be ordered.

Universal Security Wall or Ceiling Mount CO, Gas & Smoke Alarm, model MICN109, with a Dual Sensor

3-in-1 Smart Alarm uses a single sensor to detect both Carbon Monoxide and Natural Gas. Microprocessor Intelligence provides superior nuisance alarm resistance, temperature & humidity compensation, self diagnostics and Quick Find alarm origination features. Perfect for new or replacement installations, this hardwired 120 Volt AC/DC combination smoke and fire, carbon monoxide and natural gas alarm offers time-saving installation features, value and quality.

• Advanced smoke recognition, Provides faster response to smoldering fires than conventional smoke alarms
• Auto sensitivity calibration, Prevents nuisance alarms and provides consistency
• Self-diagnostic feature, Performs a status check upon power up to ensure alarm is functioning properly
• Ambient condition compensation, Automatically adjusts sensitivity for temperature and humidity conditions
• Replacement or retrofit Any existing USI Electric or Universal brand 120V alarm using existing wiring and mounting bracket
• Quick activation pull tab preserves battery life. Pre-installed battery is quickly activated without removing alarm from bracket
• Universal mounting bracket fits any standard wiring junction box, single gang, round or octagon, up to 4 inch
• Quick connect wiring harness, Longer 8inch pigtail wires are pre-stripped
• Larger mounting base, Covers drywall imperfections and old paint marks
• Quick Find alarm origination feature, Patented feature easily identifies first alarm to sound in an interconnected system
• Product end-of-service life warning; Alarm signals when it is time to replace after approximately 7 years (from the date of initial power-up)
• Front-load battery drawer, Replace battery without removing alarm from bracket
• Single silence/test button, Temporarily quiets nonemergency alarms and tests alarm functionality
• Full-size plastic dust cover, Protects alarm from dust, debris and painting during construction or home remodeling
• 2 tamper resistant locking features, Prevents alarm and battery removal
• Sensor Type:
  • Smoke & Fire - M Series Ionization
  • CO & NG - Solid State, Metal Oxide
• Power: 120 Volt AC 60 Hz + 9 Volt Energizer alkaline battery backup (battery incl.)
• Audible Alarm: 85 dB at 10 feet
• Temperature Range: 32 degrees F to 100 degrees F (0 degrees C to 38 degrees C)
• Humidity Range: 10% to 95% RH
• LED: 3 LEDs: alarm, power, CO, gas
• Size: 5.0" x 5.0" x 2.0"
• Warranty: 5 year limited

Regulatory Compliance:
California State Fire Marshal (CSFM)
National Fire Protection Association (NFPA)
Housing and Urban Development (HUD)
Federal Housing Authority (FHA)
UTGT / UTHA / CZHF (UL)