AiRaider 433, Water Mitigation System 15 GPM 3/4" (28426) 115v

AiRaider Radon and VOC in Water Mitigation System. AiRaider model number 433 with 3/4" Sharkbite fitting, up to 15 GPM flow rate. 115vAC

Radon in waster mitigation system. Also removes many other VOC's (Volatile Organic Compounds).

• Repressurization pump required (wire included)
• Repressurization tank required: 20 gallon minimum
• 3/4" Quick-connect shark bite fittings
• Pump Control with Smart Valve system
• Failsafe floats and valves
• Tank made of FDA approved materials
• Blower rated for years of continuous duty
• Built-in Hammer Arrester
• Compact, patented design U.S. Patent #5,614,086
• Blower: 0.5 Horsepower Regenerative Blower, 2.5 Max Amp
• Pump Controller: Flexcon Smart Valve to Regulate Pump, Pressure and Reduce On/Off Cycling
• Solenoid Valves: Normally Closed Metal Housed Class F120 VAC BunaN Seal Brass Valve Body 3/4” NPT
• Failsafe Floats: Two Failsafe Floats to Help Prevent Extreme Water Level Fluctuations.
  • Upper Float Guards against Overflow
  •  Lower Float Protects Pump from Potential Run-Dry Condition
• Electrical Requirements: 110vAC (15 Amp Dedicated Circuit)
• Flow: Up to 15 GPM
• Radon Reduction: Up to 99% effective
• Water Inlet/Outlet Connections: 3/4" Quick-Connect Shark Bite to Suit 3/4" Pex or Copper
• Vent Line: 2" or 3" PVC Pipe
• Air Inlet: Via 10 Micron Filter
• Tank: Double Wall Insulated NSF Rated for Potable Water
• Tank Operating Capacity: Up to 42 Gallons (Total Internal Volume 65 gallons)
• Overall Dimensions: 35" H x 34.25" W x 22" L
• Supplied with a 2" x 3" coupling

RadonAway warrants that the AIRaider™ will be free from defective materials and workmanship for the period of two (2) years from the date of purchase.