Reference only — this item is no longer available.
This product has been discontinued and cannot be ordered. We keep the page online so the specifications and documentation stay available to anyone still running the equipment. Current replacements are listed further down.
Discontinued
Product details (archived)
The information below is retained for reference only. This item is discontinued and cannot be ordered.
Cable & Wire Length Meter 26 to 4/0 AWG (CLM100) with Case
The UEI CLM100 Digital Cable and Wire Length Meter is an excellent tool to measure spooled or wound cable or wire.
Built solid and supplied with a Ruggedized boot for reliable performance in the field. Currently being utilized by major utility companies, electrical contractors, wholesalers,
installers any many others to get quick inventory calculations or measurements to account for the amount of wire/cable installed in a given period, job or day. It is very accurate and easy to use. Simply attach the Kelvin Clips to both ends
of the cable. Adjust the indicator to the size wire you are measuring and that's it. A temperature compensation circuit ensures accuracy by compensating for the temperature of the wire.
- Large 4 digit LCD display with enunciators
- Measures in feet and meters
- Easy to use and calibrate
- Measures copper and aluminum cable, covers the major wire types
- Auto power off (after being idle after 15 minutes)
- Automatic temperature compensation
- Low battery indicator
- Milli-ohm measurement capability
- User calibration mode (calibration standard included)
- Identifies high-resistance connections
Specifications:
| Wire Size: |
26 to 4/0 AWG (250 to 500 MCM) |
| Measuring Length: |
15 to 30,000 feet (5-9144m) |
| Operating Temp Range: |
32° to 104°F (0° to 40°C) |
|
Operating humidity: |
20 to 80% RH non-condensing |
| Accuracy: |
within (2% of reading + LSD) at 65° to 75°F
within (3% of reading + LSD) at below 65° and above 75°F
*LSD = Least Significant Digit |
|
Temp Compensation: |
Automatic |
|
Resistance Range: |
0 to 65 ohms |
|
Resolution: |
0.5 feet
(0.1m Length) 1 milliohm resistance |
|
Power: |
9 volt battery |
|
Auto power off: |
After approximately 5 minutes |
| Battery life: |
Typically 40 hours (90 hours in Sleep Mode). Extended measurements can
lower battery life |
Supplied with:
- 2 (easy-to-attach) Kelvin Clips on pre-calibrated leads (approx 4' long)
- Ruggedized boot with clips
- Copper calibration bar for automatic calibration
- Abrasive pad to remove oxidation
- Rugged carrying case
- Battery
- Owners manual
- 5 year limited manufacturers warranty
Download Owner's manual (PDF 470kb)