10 Minute ATP Test Swabs 50 Pack (MT50) No Lab Work Needed

50 Pack of Pro Clean 10 Minute ATP Test Swabs give visual result in 10 minutes with No Lab Work or special equipment needed.

DATED Best by: 2026-07-21

Fast and easy way to check whether cleaning has been carried out to a satisfactory standard by means of protein detection. Everything you need for a result is contained in the compact device. There is no need for an instrument as results are visual.

Results in 1 to 10 minutes. No lab work is required. If it is green it is clean. Disposable protein swabs.

With the unique swab-click-read format and simple color change technology, this swab test is very easy to use and implement in a busy production environment. The results are semi-quantitative with four possible colors. The faster the test turns purple the higher the level of contamination on a surface. The test detects protein and other reducing agents, considered as a superior hygiene indicator to glucose as more difficult to remove from a surface.

• Minimal investment since there is no special instruments required
• No complicated set-up
• No lab fees
• Immediate biochemical reaction*
• Quick and easy to use, just three simple steps
• Results within 10 minutes, with a simple color change
• No need to store under refrigerated conditions.

* Indicates ATP presence (not type)

Instructions:

1. Place the test swabs at room temperature for at least 10 minutes before use. Grip the sample stick handle and remove the swab from the device. On dry surfaces use a sterile moisturizer like distilled water, apply 4 drops to the swab OR apply 4 drops to the surface to be tested.
2. Swab the test area. Where practical, swab an area approximately 10 cm by 10 cm and swab the area in one direction and then swab the area in the opposite direction. Apply pressure on the swab and rotate the swab as the sample is collected to ensure repeatable and effective sampling.
3. Reinsert the sample stick into the device with the handle inserted to the original position of the unused device. At this point you can either activate and read immediately, or, if it is more convenient, the test swab may be labeled and left un-activated for up to four hours before activation and reading of multiple swabs simultaneously.
4. To process the sample, push down firmly on the top of the sample stick handle. The handle will slide into the device tube and the top of the handle should be level with the top of the device tube when fully depressed. Grip the top of the device and shake rapidly side-to-side for at least five seconds to mix the sample and reagent. The solution will turn mint green.
5. Set a timer for 10 minutes and incubate the swabs at room temperature and in a vertical position. After the ten minute time period, compare the color of the swab and the solution against the color chart.

User Responsibility

• When selecting a test method, it is important to recognize that external factors such as sampling methods, testing protocols, sample preparation, handling, and laboratory technique may influence results.
• It is the user's responsibility in selecting any test method to evaluate a sufficient number of samples with the appropriate matrices and challenges to satisfy the user that the chosen test method meets the user's criteria.
• It is also the user's responsibility to determent that any test methods and results meet its customers' and suppliers' requirements.

As with any test method, results obtained from use of this product do not constitute a guarantee of the quality of the matrices or processes tested.

Click to Download Safety Data Sheet - SDS

Protein swab tests indicate the hygiene level after cleaning by detecting residuals of protein which can be left behind after inadequate cleaning. The swabs are assessed after 10 minutes using a color scale and are rated as satisfactory, borderline or unsatisfactory.