Bench Type Professional LCR Meter (LCR-9185SD) with Alligator Clips

Lutron Bench Type Professional LCR Meter (LCR-9185SD) with Alligator Clips

• Real-time datalogger with SD card, no extra software needed for Excel download.
• Built-in clock for date and time tracking (year/month/date/hour/minute/second).
• Sampling time can be set from 2 seconds to 3600 seconds.
• Manual datalogger available by setting the sampling time to 0 seconds.
• 6000 counts ADC resolution.
• High-performance analog front end for impedance (Z) measurement.
• Supports Z / DCR measurement for LCR mode.
• Four available test frequencies: 100 Hz, 120 Hz, 1 KHz, and 10 KHz.
• Test AC signal level: 0.5 V rms typically.
• Test range examples:
  • Inductance (L): 600.0 uH to 60.00 H.
  • Capacitance (C): 600.0 pF to 600.0 uF.
  • Resistance (R): 60.00 Ω to 20.00 MΩ.
• Minimum source resistance: 120Ω typical.
• Six ratio resistor ranges for LCR mode.
• Buzzer sound driver with selectable driving pattern and frequency.

General Specifications

• Display: 97 mm x 56 mm large LCD display.
• Test frequencies: 100 Hz, 120 Hz, 1 KHz, and 10 KHz.
• Modes: L/C/R function selector, L/C/R frequency selector.
• Selectable parameters: D/Q/θ, SER/PAL.
• Dissipation factor range: 0.000 to 9999.
• Quality factor range: 0.000 to 9999.
• θ measurement range: ± 90°.
• Calibration: Open/short calibration available.

Datalogger Specifications

• Automatic sampling time: 2 seconds to 3600 seconds.
• Manual data logging by pressing the datalogger button once to save data.
• Data error rate: ≤ 0.1% of total saved data.
• SD card capacity: 2 GB to 32 GB.

Power Supply

• 1.5 V (AA) batteries x 6 PCs or DC 9V adapter input.
• AC/DC power adapter (optional).
• Normal operation without SD card data saving: Approx. DC 11 mA.
• With SD card data saving: Increases to approx. DC 25 mA.

Electrical Specifications (23 ± 5℃)

• Capacitance (SER/PAL): Test signal of 0.5V(rms).
• Resistance (DCR) and other test ranges are available based on calibration and specified ranges.

Analog Output

• Analog output: 4 to 20 mA, linear output over measurement range.

Accessories Included

• Alligator clips: 1 PC.
• Operation manual: 1 PC.

Optional Accessories

• SMD test clip (SMDC-21).

Remarks

• All specifications are based on battery operation.
• Do not apply voltages larger than 30 V to input terminals.
• Discharge capacitor before measurement.
• For accurate measurements of SMD components, use optional SMD test clip (SMDC-21).