Lutron 3 Phase Power Analyzer (DW-6095) with Harmonic Measurements

Lutron 3 Phase Power Analyzer (DW-6095) with Harmonic Measurements

• Analyzes 3-phase multi-power systems: 1P/2W, 1P/3W, 3P/3W, 3P/4W.
• Includes 3 current probes (CP-1201) with no need for calibration when changing probes.
• Current probe input signals: 200 mV, 300 mV, 500 mV, 1 V, 2 V, 3 V; ranges: 20 A, 200 A, 2000 A, 30 A, 300 A, 3000 A.
• Compatible with universal current probes.
• Complete set includes 4 test leads, 4 alligator clips, 3 clamp probes (CP-1201), AC to DC 9V adapter, 2 GB SD memory card, and carrying bag.
• Measurement modes: Phase-to-phase voltage (V), phase-to-ground voltage (V), phase-to-ground current (A), power factors, and system power.
• Displays waveform with peak values and provides harmonic analysis (up to 50th order).
• Displays total harmonic distortion (THD) and graphic phase diagrams.
• Measures 3-phase voltage/current unbalanced ratio (VUR, AUR) and unbalanced factor.
• Captures transient events with programmable thresholds (e.g., dips, swells, outages).
• Programmable CT and PT ratios (1 to 600, and 1 to 1000, respectively).
• ACV input impedance is 10 Mega ohms.
• Safety standard: IEC 1010, CAT III 600V.
• Real-time data recording on SD card with a sampling time from 2 to 7200 seconds.
• Powered by 8 AA (UM-3) DC 1.5 V batteries or DC 9V adapter.
• Supports computer data output via optional USB cable (USB-01) or RS232 cable (UPCB-02).

General Specifications

• Circuit: Custom one-chip microprocessor LSI circuit.
• Display: Dot matrix LCD (320 x 240 pixels) with backlight, size 81.4 x 61 mm (3.2 x 2.4 inches).
• Measurement functions: Voltage (V), current (A), power (KW, KVA, KVAR), power factor (PF), frequency, phase angle, and harmonic display.
• Connections: 1P/2W, 1P/3W, 3P/3W, 3P/4W.
• Voltage range: 10 ACV to 600 ACV, auto range.
• Current probe input signals: 200 mV to 3 V; ranges: 20 A to 3000 A.
• Data hold to freeze the display reading.
• Data recording via SD card.
• Sampling time: Approx. 1 second.
• Manual power off by push button.

Power Supply

• 8 AA (UM-3) DC 1.5 V batteries (alkaline) or AC to DC 9V adapter.
• Power consumption: Meter - 500 DCmA; Clamp - 34 DCmA.

Dimensions and Weight

• Meter dimensions: 225 x 125 x 64 mm (8.86 x 4.92 x 2.52 inches).
• Clamp dimensions: 210 x 64 x 33 mm (8.3 x 2.5 x 1.3 inches).
• Weight: Meter - 948 g (including batteries); Clamp - 467 g (with cable).

Accessories Included

• Instruction manual: 1 PC.
• Test leads (TL88-4AT): 1 set (4 PCs).
• Alligator clips (TL88-4AC): 1 set (4 PCs).
• Clamp probe (CP-1201): 3 PCs.
• AC to DC 9V adapter: 1 PC.
• SD card (2 GB): 1 PC.
• Carrying bag: 1 PC.

Optional Accessories

• 2000 Amp current probe (CP-2000).
• 200 Amp current probe (CP-200).
• Flexible 3000 Amp current probe (CP-3000).
• USB cable (USB-01).
• RS232 cable (UPCB-02).
• Data acquisition software (SW-U811).

Electrical Specifications

• Frequency: 45 to 65 Hz; resolution 0.1 Hz; accuracy ±0.1 Hz.
• Voltage (ACV): Range 10.0V to 600.0V; resolution 0.1V; accuracy ±(0.5%+0.5V).
• Current (ACA): Range 20 A to 3000 A depending on probe; resolution varies; accuracy ±(1% + 0.1 A) for low ranges.
• Power factor (PF): Range 0.00 to 1.00; resolution 0.01; accuracy ±0.04.
• Harmonics: Measures up to 50th order for both AC voltage and current.
• Power consumption measurements for active, apparent, and reactive power in KW, KVA, and KVAR with specified ranges and resolutions.

Safety

• Standard: IEC 1010, CAT III 600 V.
• ACV input impedance: 10 Mega ohms.
• Overload protection: ACV 720 ACV rms; ACA 1300 ACA with clamp probe.