| Circuit |
Custom one-chip microprocessor LSI circuit |
| Display |
* LCD Size : 81.4 X 54 mm ( 3.2 X 2.1 inch )
* TFT LCD (320 X 240 pixels ) with back light. |
| Measurement Unit |
* V (phase-to-phase)
* V (phase-to-ground)
* A (phase-to-ground)
* KW / KVA / KVAR / PF (phase)
KW / KVA / KVAR / PF (system)
KWH / KVAH / KVARH / PFH (system)
* Power factor
* Phase angle
* Frequency
* Harmonics display. |
| Over input |
/ |
| Zero |
/ |
| Sampling Time |
Approx. 1 second. |
| Data Hold |
Freeze the display reading. |
| Memory Recall |
/ |
| Altitude (max) |
2000 meters |
| Data output |
RS232 computer serial interface :
* Connect the optional USB cable USB-01 will get the USB plug.
* Connect the optional RS232 cable UPCB-02 will get the RS232 plug. |
| Operating Temperature |
0 to 50°C ( 32 to 122°F ). |
| Operating Humidity |
Less than 80% R.H.. |
| Power Supply |
* DC 1.5V, AA ( UM-3 ) Battery X 8 PCs (Alkaline or heavy-duty battery).
* AC to DC 9V power adapter. |
| Power Consumption |
* Meter : 362 DCmA.
* Clamp : 22 DCmA. |
| Weight |
* Meter : 840g ( meter only )
* Clamp ( with cable ) : 500g |
| Dimensions |
Meter : 225 X 125 X 64 mm ( 8.86 X 4.92 X 2.52 inch )
Clamp : 210 X 64 X 33mm ( 8.3 X 2.5 X 1.3 inch )
Clamp Jaw : 86 mm (3.4 inch)- outside |
| Wire connections |
1P/2W, 1P/3W, 3P/3W, 3P/4W. |
| Voltage ranges |
10 ACV to 600 ACV, auto range. |
| Current ranges |
* Current probe input signal volage ( ACV ) :
200mV/300mV/500mV/1V/2V/3V.
* Current probe input current range ( ACA ) :
20 A/200A/2000A (1200 A)/30A/300A/3000A
60A/600A/6000A
* Meter can cooperate the universal current probe. |
| Safety standard |
IEC1010 CAT III 600 V. |
| ACV input impedance |
10 Mega ohms. |
| Range select |
ACV Auto range.
ACA Manual range. |
| Clamp frequency response |
40 Hz to 1 KHz. |
| Spec. tested frequency |
45 to 65 Hz. |
| Over load protection |
ACV :720 ACV rms
ACA :1300 ACA with clamp probe
* For the Clamp ,CP-1201 |
| Over Indicator |
* LCD display show " OL ".
* The data save into the SD card will show " 9999 " or " 999 " ( overleap
the decimal point ). |
| Under Indicator |
* The data save into the SD card will show " 9999 " or " 999 " ( overleap
the decimal point ). |
| Data Recording |
SD Card |
| Real time data logger |
* Real time data logger, saved the data into SD memory card and down load the all the measured value with the time information
( year/month/data/hour/minute/second ) download to the Excel
* Sampling time for data logger : 2 seconds to 7200 seconds, the during of setting step are 2 seconds. |
| Data Output USB/RS232 |
RS232 computer serial interface :
* Connect the optional USB cable USB-01 will get the USB plug.
* Connect the optional RS232 cable UPCB-02 will get the RS232 plug. |
| Clamp max. conductor Size |
50 mm ( 2.0 inch ) Dia.
* For the Clamp ,CP-1201 |
| Rated Tripping Current Settings |
/ |
| Test Current Duration |
/ |
| Operating Factor |
/ |
| Tested Mains Voltage |
/ |
| Standard Accessories |
* Instruction Manual (1 PC)
* Test Leads (1 Set, 4 PCs)
* Alligator Clips (1 Set, 4 PCs)
* Clamp Probes (3 PCs, CP-1201)
* AC to DC 9V Adapter (1 PC)
* Carrying Case (1 PC) |
| Optional Accessories |
* 2000 Amp current probe, CP-2000
* 200 Amp current probe, CP-200
* 1200 Amp current probe, CP-1201
* Flexible 3000 Amp current probe, CP-3000, CPF-3002,CP-3001, CP-6001
* USB Cable , USB-01
* RS232 cable, UPCB-02
* Data Acquisition software, SW-U811 |
Limited QtyOnly 1 remain
