Protimeter MMS3 Moisture Analysis Kit (BLD9800C) with Hard Case

Protimeter MMS3 Moisture Analysis Kit (BLD9800C) with Hard Case.

The most complete moisture meter and detection system with Hard Case, software and data connect cable

• Electrode pin moisture measurement
• Pinless, non-invasive moisture measurement
• Non-contact Infrared thermometer for surface temperature measurement
• Fast responding relative humidity and temperature measurement
• Fast responding hygrometer speeds up building surveys
• No need to plug in multiple accessories
• Intuitive user interface with color screen
• Data logging
• Firmware upgradable
• Built-in psychrometric calculations
• Surface non-contact temperature measurement with laser pointer
• Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
• Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Use built-in pin or plug in the heavy duty moisture probe for measuring in hard-to-reach areas
  • Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and surface structures
  • Use accessories such as hammer probes to measure at depth
• Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Non-invasive pinless radio frequency finds moisture up to 3/4" (19 mm)
  • Search mode not adversely affected by surface moisture
• Hygrometer measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and grains per pound, as well as multiple psychrometric calculations
  • Allows measurement of equipment such as dehumidifiers
  • Measures equilibrium relative humidity in concrete floors using the in situ probe method
  • Use to detect conditions for mold and fungus growth, that can lead to unhealthy living conditions
• Surface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint

Specifications:

• Moisture Measurement Range:
  • Pin % WME) 8% to 99, readings over 30% are relative
  • Non-invasive (RF) up to 3/4" (19mm) deep 60 to 1000 (relative)
• IR Surface Temperature Probe Range: 15° to 120°F (-10° to 50°C)
• Infrared Surface Temperature Range: IR Based With 12:1 (D:S) Ratio
  • Range -4°F to 176°F (-20°C to 80°C)
  • Accuracy ±3.6°F (±2°C)
• Quikstick ST Data (Nominal)
  • 0% to 10% RH, ±3% RH at 68°F (20°C),
  • 10% to 90% RH, ±2% RH at 68°F (20°C),
  • 90% to 100% RH, ±3% RH at 68°F (20°C),
  • Range 32°F to 122°F (0°C to 50°C) ±0.6°F (±0.3°C)
  • Nominal response 30% to 90% and back to 30% RH in 45 seconds @ 68°F (20°C)
• Data Storage: Store up to 8,000 results with date and time stamp from all instrument functions with the push of a button. Store 6100 results with automatic logging.
• Maximum Needle Depth: 0.4" (10mm)
• Display: Color LCD
• Battery: 2xAA Alkaline Batteries (included)
• Weight: 10oz (283g)
• Dimensions (LxWxH): 7.5" x 3.7" x 2.2 (190.5 x 94 x 56mm)

Supplied with:

• Hard Shell ABS Padded Instrument Case BLD5910
• (1) Quikstick ST Sensor POL8751
• (1) Heavy Duty External Probe BLD5060
• (2) Spare Pins BLD500
• 2 Year limited manufacturers warranty