Protimeter MMS3 Restoration Kit (BLD9800CR) with Hard Case

MMS3 Protimeter 4-Way Restoration Kit (BLD9800CR) with Hard Case

The MMS3 Restoration Kit includes the Heavy Duty Hammer Probe as well as Insulated Wall Probes, Hard Case, Software and Data Connect Cable.

• Fast responding hygrometer speeds up building surveys.
• No need to plug in multiple accessories.
• Intuitive user interface with color screen.
• Data logging.
• Firmware (meter software) is easy to upgrade.
• Built-in psychrometric calculations.
• Surface non-contact temperature measurement with laser pointer
• Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
• Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Use built-in pin or plug in the heavy duty moisture probe for measuring in hard-to-reach areas
  • Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and surface structures
  • Use accessories such as hammer probes to measure at depth
• Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Non-invasive pinless radio frequency finds moisture up to 3/4" (19 mm).
  • Search mode not adversely affected by surface moisture.
• Hygrometer measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and grains per pound, as well as multiple psychrometric calculations
  • Allows measurement of equipment such as dehumidifiers
  • Measures equilibrium relative humidity in concrete floors using the in situ probe method
  • Use to detect conditions for mold and fungus growth, that can lead to unhealthy living conditions
• Surface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint

Specifications:

• Moisture Measurement Range:
  • Pin % WME) 8% to 99, readings over 30% are relative
  • Non-invasive (RF) up to 3/4" (19mm) deep 60 to 1000 (relative)
• IR Surface Temperature Probe Range: 15° to 120°F (-10° to 50°C)
• Infrared Surface Temperature Range: IR Based With 12:1 (D:S) Ratio
  • Range -4°F to 176°F (-20°C to 80°C).
  • Accuracy ±3.6°F (±2°C).
• Quikstick ST Data (Nominal)
  • 0% to 10% RH, ±3% RH at 68°F (20°C),
  • 10% to 90% RH, ±2% RH at 68°F (20°C),
  • 90% to 100% RH, ±3% RH at 68°F (20°C),
  • Range 32°F to 122°F (0°C to 50°C) ±0.6°F (±0.3°C).
  • Nominal response 30% to 90% and back to 30% RH in 45 seconds @ 68°F (20°C).
• Data Storage: Store up to 8,000 results with date and time stamp from all instrument functions with the push of a button. Store 6100 results with automatic logging.
• Maximum Needle Depth: 0.4" (10mm).
• Display: Color LCD.
• Battery: 2xAA Alkaline Batteries (included).
• Weight: 10oz (283g).
• Dimensions (LxWxH): 7.5" x 3.7" x 2.2 (190.5 x 94 x 56mm).

Includes:

• Hard Cover Padded Instrument Case BLD5910
• Heavy Duty Slide-Hammer Electrode Probe (BLD5055)
• Insulated 5.5" deep wall probes (BLD5018)
• (1) Quikstick ST Sensor POL8751
• (1) Heavy Duty External Probe BLD5060
• (2) Spare Pins BLD500
• 2 Year limited manufacturers warranty