Solo 424 Corded Heat Detector Test Head (SOLO-424) 220vAC

Product details (archived)

The information below is retained for reference only. This item is discontinued and cannot be ordered.

SOLO 424 Corded Heat Detector Test Head (SOLO-424) 220/240 volts AC

The SOLO 424 is a professional and robust tool for testing heat detectors fitted at heights up to 9m / 30ft. Unlike the SOLO 461, it does require a power cord / mains lead but, conversely, does not require any special energy saving features.

• Quick activation times.
• Lightweight and easy to use.
• Detector types:
  • spot.
  • point type.
  • fixed temperature.
  • rate-of-rise.
  • combination detectors up to 194°F / 90°C.
• Universal design suits widest range of detectors.
• Supplied with 16ft / 5m cable (additional 16ft / 5m cable available).
• Operating voltage: 220 to 240 volts AC.
• Power: approximately 700 watts.
• Frequency: 50 / 60 Hz.
• Weight: 2 pounds 6 ounces (1.20kg).
• Dimensions:
  • Inside diameter: 4.5" (115mm).
  • Working depth: 5.9" x 2.4".
• Safety: thermal cut out, electrically fused, double insulated.

Looking for the 110/120 vAC version SOLO 423

Accessories and poles:

• SOLO 100 Fiberglass 4 Section Telescopic Pole 14.7 feet.
• SOLO 108 Fiberglass 2 Section Telescopic Pole 7.8 feet.
• SOLO 101 Fiberglass Extension Pole 3.7 feet.
• SOLO 200 Universal Detector Removal Tool.
• SOLO 610 Protective Carrying Bag.

Download Brochure (PDF format)

Instructions for Use

• Before use, check label for correct voltage supply.
• Tester is supplied with a short lead at the end of which is fitted a male industrial safety plug.
• Operator will need to provide extension cable of the necessary length fitted with a female coupling.
• Press the red switch which will then illuminate to indicate the unit is operational.
• Tester cup should be placed completely over the detector (where detector size allows) until the
  detector activates.
• Hold in place until alarm occurs, or the LED of the detector flashes (may take up to 60 seconds
  for some grades of heat detectors).

WARNINGS

• Do not use on Non-Restorable Heat Detectors (Solo 461 is recommended).
• Do NOT touch metal grill inside the transparent cup during operation, or for several minutes after
  testing.
• Do not obstruct air vents on housing.
• Do not use device near surfaces or objects which may be damaged or react to temperatures of
  approximately 212°F.
• Use device only in the manner described and intended.
• No unqualified person should attempt to repair or replace parts.