TestiFire TF1000 Electronic Smoke & Heat Detector Test Head ONLY

TestiFire 1000 Electronic Smoke & Heat Detector Tester (TF1000) Replacement Test Head

This is the test head only. In order to operate a smoke cartridge TS3 and a battery is required.

Link to the TF1001-kit, which includes everything needed to test approximately 500 smoke detectors, as well as an extra battery and charger.

The TestiFire is capable of producing smoke and heat stimuli for testing and can be conducted independently, sequentially or simultaneously. UL certified, TestiFire is approved by leading detector manufacturers from around the world.

• Head Unit only
• Uses Testifire Smoke Capsules
• Fully programmable to carry out single, simultaneous or combined test cycles

Testifire's use of advanced technologies means that it is able to test an increasingly wide range of detectors. Latest technology stimuli production and delivery renders the product suitable for testing everything from latest technology, complex algorithm, multi sensors to aspirating systems (as well as the more 'traditional' detectors in between).

• Optical point (photoelectric) smoke sensors
  Single, laser, dual wavelength or dual scatter types.
  
• Ionization smoke sensors
  
• Aspirating detectors
  The unique method of smoke generation used by TestiFire provides a smoke profile which is suitable for testing aspirating detection systems. Use of the TestiFire Remote Control also allows use with 'holes' along an aspirating pipe run.
  
• Virtual chamber detectors
  Some types of detector - such as those with 'virtual chambers' do not have the physical 'presence' to automatically initiate a test since they do not interrupt the infrared beam within TestiFire. The TestiFire 25 Remote Control overcomes this challenge by enabling remote manual initiation and end of a test sequence (at a distance of up to nine meters).
  
• Thermal sensors
  Fixed temperature and rate of rise. TestiFire features two heat settings. The standard setting allows testing of rate-of-rise and fixed temperature heat settings up to 90°C (194°F). The High Heat setting allows testing of detectors set at higher temperature up to 100°C (212°F).
  
• Multi-sensor or multi-criteria detectors
  Multi-sensor detectors may respond to a functional test from a single phenomenon, e.g. smoke, heat. However, a single phenomenon test is not necessarily an adequate test in the field for this type of detector. Each of the detection principles present within the detector (e.g.: smoke / heat / CO) needs to be individually tested for the specific detection principle. TestiFire allows the production of different stimuli (e.g. smoke, heat) to be achieved singularly, sequentially or simultaneously in any combination.
  

Conventional, addressable or analogue addressable detectors of any of the above detector types can all be tested using TestiFire.

Options:

• TestiFire TF25 Remote Control.
• 3 pack of Smoke Capsule Cartridges TS3.
• SOLO-100 Fiberglass 4 Section Telescopic Pole 14.7 feet.
• SOLO-101 Fiberglass Extension Pole 3.7 feet, each.
• SOLO-200 Universal Detector Removal Tool.
• SOLO-610 Protective Carrying Bag.

TestiFire Kit Combinations

Kit Number	Smoke Testing	Heat Testing	CO Testing	Access Height+	Detector Removal	Case Included
TF2851				24 feet
TF2823				30 feet
TF1851			-	24 feet
TF1823			-	30 feet

Download Quick Start Guide.

Download Users Manual.

• Download Safety Data Sheet for Carbon Monoxide Cartridge - SDS.
• Download Safety Data Sheet for Smoke Capsule - SDS.