UEI CO & CO2 Analyzer Kit (C20) with Flue Probe & Case

Product details (archived)

The information below is retained for reference only. This item is discontinued and cannot be ordered.

UEI C20 Combustion Analyzer Kit measure both Carbon Monoxide and Carbon Dioxide with Built-in Pump

The meter gives a quick, continuous readout of the combustion process. Readings change in real-time as adjustments are made to help zero in on the proper setting.

• Measures: Carbon Monoxide CO in part per million (ppm)
• Measures Carbon Dioxide CO2 in percentage volume (%)
• Maximum CO reading
• Inline water trap
• Real time analysis
• EOS technology sensor direct CO2 Measurements No Sensor Replacement 10 Year Life Expectancy
• Direct CO Measurements
• Temperature range:
  • Flue Temperature 32-1112˚F (0-600˚C) 1.0˚F ±(2%RDG ±3.6˚F(2˚C))
  • Net Temperature2 32-1112˚F (0-600˚C) 1.0˚F ±(2%RDG ±3.6˚F(2˚C)
• Carbon Monoxide (CO) range: 1 to 1999ppm with 1ppm resolution and accuracy within 5ppm at below 100ppm and within 5% of reading over 100ppm
• Carbon Dioxide (CO2) range (using dry gases as STP): 0 to 30% with 0.1% resolution and accuracy within 0.3%
• Operating temperature: 32° F to 104° F
  NOTE most batteries are not rated for below -4° F or above 125° F
• Operating humidity: 10 to 90% RH, non condensing
• Operating atmospheric pressure: 850-1100mmHg
• Power: (4) AA alkaline batteries or equivalent
• Battery life: approximately 8 hours or more
• Dimensions:
  • Meter: 7” x 3 1/4” x 2", (with boot): 8" x 4" x 2.5"
  • Probe: 10” stainless steel shaft with approximate 36” neoprene hose
• Weight: approximately 16 ounces with batteries installed

Supplied with:

• Flue probe (KMCP72)
• Protective boot with integral magnet (SBOOT)
• Soft carrying case (AC73)
• Instruction manual (download PDF)
• 5 Year limited manufacturers warranty