Reference only — this item is no longer available.
This product has been discontinued and cannot be ordered. We keep the page online so the specifications and documentation stay available to anyone still running the equipment. Current replacements are listed further down.
Discontinued
Product details (archived)
The information below is retained for reference only. This item is discontinued and cannot be ordered.
CD100A Gas Leak Detector Features:
- Fully adjustable (thumbwheel) steady tic rate accelerates as the sensor
tip approaches a leak
- Tip light to illuminate area being tested
- Replaceable sensor
- Adjustable tick
rate to locate leaks quickly
- Fast response
time < 2 seconds to 40% LEL
- Long 18"
gooseneck for hard to reach areas
- Visual leak
detection by color-coded LED's
- Precision sensor
detects even the smallest leaks
- Long, slim
18" gooseneck probe and bright LED tip light to find combustible gas leaks
in tight areas
- Detects a wide variety of gases, including some toxic gases and nuisance
vapors. The following represents only a portion of the more common gases it
will detect:
- Combustible
- Natural
Gas (Methane)
- Gasoline
- Propane
- Jet Fuel
- Tolulene
- Ethylene oxide
- Ammonia
- Lacquer
Thinner
- Acetylene
- Halon
- Industrial Solvents
- Naptha
- Combustible
Refrigerants
- Butane
- Alcohol
- Other:
- Steam
- Hydrogen
Sulfide
- Smoke
- Acetone
Ammonia
- User adjustable
alarm preset levels
- Adjustable tick rate & visual detection LED
- Headphone jack
- Low battery indicator
Specifications:
- Sensor: Solid state conductivity (semiconductor)
- Sensitivity: <50ppm methane in air
- Probe length: 18" obedient gooseneck
- Warm up time: Approx 10 seconds
- Response time: <1 second
- Duty cycle: Continuous
- Operating temperature: 32° to 122°
F
- Operating humidity: 10 to 90% RH (non condensing)
- Power: (1) 9v alkaline battery
- Battery life: approximately 5 hours of continuous use
- Dimensions: 8" x 4" x 1.5" (add approx 1" to height & width to account
for coiled cable)
- Weight: 17oz (with batteries installed)
Supplied with:
- Sensor cap with lighted tip
- Instruction manual
- Battery
- Rubber boot protects instrument (Ruggedized)
- 1 year
limited warranty (sensor excluded)
EM151 Digital Manometer Features
- Single Input measures
positive and negative pressure to 20" WG (water gauge)
- Auto power off after 5
minutes of no activity
- Rubber-boot (ruggedized)
with built-in magnet
- Simple 2 button operation
- Measures in inches water gauge
- Time-saving alternative to
U-tube pressure measurements
- One year limited warranty
- MIN/MAX value capture
- Data hold
- Back-lit display
Specifications:
|
|
Range |
Resolution |
Accuracy |
1 psi
= |
|
inch of h2o
(WG) |
±20" |
0.01
at ±10
0.1 at <-10" and >+10" |
±0.02”WG at <2"
±1% at >2" |
27.680517 |
|
mbar |
±50 |
0.01 |
68.948253 |
- Operating range: 32° to 104° F (0 to 40° C)
- Operating humidity: 10 to 90% RH
non-condensing
- Power: 1 9v battery (included)
- Battery Life: Approx 50 hours with alkaline
battery
Supplied with:
- 2 pieces of 3/8" tubing
- Instruction manual
- 2 3/8" brass fittings (BF100)
- 9v alkaline battery
- 3 years limited
manufacturers warranty
Optional: Padded UEI Carrying Case (AC319)
with Inside Pocket & Carrying Strap
Link to Pressure Conversion Calculator (must have JAVA enabled)
Download Users Manual (PDF format)