Reference only — this item is no longer available. This product has been discontinued and cannot be ordered. We keep the page online so the specifications and documentation stay available to anyone still running the equipment. Current replacements are listed further down.

Discontinued

Kane May 905 Combustion Analyzer (K905CONOX) with Probe & Case

Reference only — not for sale

Model	K905CONOX
Manufacturer	Kane May
Category	Leak Detectors
Status	Discontinued

Browse all Leak Detectors Ask us for a replacement

Product details (archived)

The information below is retained for reference only. This item is discontinued and cannot be ordered.

The K905CONOX handheld analyzer is easy to use for domestic and industrial boiler flue gas measurement and analysis. It operates on all boiler types and can display 8 parameters simultaneously showing measurements and calculations of boiler efficiency and pollution. It measures O₂, flue and NETT temperature and calculates CO₂, boiler efficiency, excess air and losses. CO is measured with a hydrogen compensated sensor for increased accuracy. The K905 measures CO and calculates CO/CO₂ ratio (The Poison Index) to give complete readings for effective boiler analysis and safety.

Includes seven preprogrammed fuels with two positions for user-specified fuels. With 150 memory locations, tests can be stored and downloaded to the optional IR printer through the infrared port or to a PC through the RS-232 port utilizing the optional Fireworks™ software package. The unit comes complete with a large carrying case, probe and battery charger.

Features:

0 to 10,000ppm H2 compensated CO sensor
Installed memory can store up to 150 readings and can transfer data to a printer or PC (via Infra-red printer link)
Printout displays the time/date of each measurement as well as personalized information such as company name and telephone number
Long life rechargeable battery & large 4 line display

Specifications:

		Resolution	Accuracy	Range
Temp Measurement
Flue Temperature with Probe		0.1 degrees	±2 degrees C ±0.3%	32-1112 degrees F (0-600 degrees C)
Inlet Temperature		0.1 degrees	±1 degrees C ±0.3%	32-122 degrees F (0-50 degrees C)
Gas Measurement *
Oxygen O₂		0.1%	±0.2%	0 to 21%
Carbon Monoxide CO (H₂ compensated)		1ppm	±20ppm <400ppm** ±5% <5,000ppm ±10% <5,000ppm	0 to 10,000ppm
Nitric Oxide - NO₁		1ppm	±5ppm<100ppm ±5%>100ppm	0 to 5,000ppm
Sulfur Dioxide - SO₂		1ppm	±5ppm<100ppm ±5%>100ppm	0 to 5,000ppm
Calculations
Carbon Dioxide CO₂ *		0.1%	±0.3%	0 to 99.9%
Losses **		0.1%	±1.0%	0 to 99.9%
Efficiency **		0.1%	±1.0%	0 to 99.9%
Excess Air **		0.1%	±0.2%	0 to 2885.0%
Temp (Nett) **		1.0 degrees	±2 degrees C (±0.3%)	32-1112 degrees F (0-600 degrees C)
CO/CO₂ Ratio **		0.0001	±0.0001	0 to 0.9999
Poison Index **		0.01%	±0.01	0 to 99.99
	** Using dry gases at STP * Calculated

Pre-programmed Fuels: Natural Gas, Town Gas, Gascor, Light Oil, Heavy Oil, Propane, Butane, Anthracite, Coke, Coal, Kinsale Gas
Dimensions:
- Handset: 8.7" x 2.2" x 4.7" (220 x 55 x 120mm)
- Probe Length: 420mm, 8mm Diameter with 285mm stainless steel shaft, type K thermocouple and 1.5m neoprene hose
Weight: 2.2 pounds
Altitude to 2000m
Ambient operating temperature range: 32 degrees to 113 degrees F (0 degrees to 45 degrees C)
Ambient operating humidity range:10 to 90% RH non condensing
Power supply (battery charger): Input: 110vAC / 220vAC; nominal Output: 12vAC off load
Battery Life: >6 hours from full charge

Supplied with:

NO1 Sensor 13251.
NO2 Sensor 10533.
Probe KMCP10.
Battery and Charger (KMCU900/110).
Protective rubber boot, User's manual & Large Cordura carrying case
One year limited manufacturer's warranty (2 year on O₂ sensor)

Options:

SENSOR	RANGE	Resolution	Accuracy	PART#
Nitric Oxide - NO₁ low range	0~100ppm	1ppm	±2ppm<30ppm ±5ppm>30ppm	18079
Carbon Monoxide (high range)	0 to 10%	0.01%	±5% from 0.1-10%
Nitrogen Dioxide NO₂	0~1,000ppm	1ppm	±5ppm<100ppm ±10ppm<500ppm ±5%>500ppm	10533
Sulfur Dioxide - SO₂ low range	0~100ppm	1ppm	±5ppm<100ppm ±5%>100ppm	18131
Pressure	0.1 mbar	±150mbar	±2% of full scale	KMPS4

Smoke Pump Test Kit: SPT1
Inlet Temperature Probe (6" Liquid K-Type): ATT100
Infrared Printer: KMIRP2

Download Data Sheet (PDF format)

Download Users Manual (PDF format)