IMPACT Gas Monitor CO, H2S, O2 & LEL (IMPACT-KIT)

Product details (archived)

The information below is retained for reference only. This item is discontinued and cannot be ordered.

IMPACT Gas Monitor CO, H2S, O2 & LEL (IMPACT-KIT)

Description

The IMPACT portable four-gas monitor is designed to detect and display oxygen (O₂), carbon monoxide (CO), hydrogen sulfide (H₂S), and flammable gases (LEL) using a disposable, pre-calibrated sensor cartridge. The monitor utilizes patented Reflex™ technology to help ensure accurate and reliable measurements during operation.

Each Honeywell Lumidor IMPACT multi-gas monitor is supplied fully configured and ready for use. The unit supports quick cartridge replacement by the user and includes accessories for personal monitoring, calibration, and data management.

Features

• Detects oxygen, carbon monoxide, hydrogen sulfide, and flammable gases.
• Dust-, water-, and weather-resistant construction.
• Pre-calibrated plug-in sensor cartridge replaceable by the user.
• Three levels of instantaneous alarms with time-weighted average (TWA) and short-term exposure limit (STEL) alarms for toxic gases.
• Audible, visual, and confidence alarms.
• Compatible with Windows-based PC software for configuration and data management.
• High-impact, anti-static ABS housing compliant with EN50014.
• Belt clip included for portable use.

Included Items

• IMPACT multi-gas monitor.
• Pre-installed disposable sensor cartridge.
• Quick start guide.
• Multi-lingual operating instructions (CD).
• Dry cell battery holders and batteries.
• Belt clip.
• Flow adaptor.

Gas Detection Specifications

• Flammable Gas (LEL): 0–100% LEL, response < 10 seconds, accuracy ±3% LEL.
• Oxygen (O₂): 0–25% volume, response < 10 seconds, accuracy ±0.3% volume.
• Carbon Monoxide (CO): 0–500 ppm, response < 30 seconds, accuracy ±12.5 ppm.
• Hydrogen Sulfide (H₂S): 0–50 ppm, response < 30 seconds, accuracy ±2.5 ppm.

Flammable gas sensor responds to common gases including methane, propane, butane, pentane, hydrogen, methanol, octane, and ethane.

Specifications

• Ingress Protection Rating: Instrument IP65 (NEMA 4X), Cartridge IP54 (NEMA 4).
• Display: Backlit liquid crystal display (LCD).
• Operating Temperature: -4°F to +122°F (-20°C to +50°C).
• Storage Temperature: -40°F to +176°F (-40°C to +80°C).
• Humidity: 20–90% RH continuous; 0–99% RH intermittent (non-condensing).
• Audible Alarm: Dual-tone alarms rated at 85 dBA at 1 meter (90 dBA at 1 foot).
• Visual Alarm: Green confidence flash with rapid red flashing for fault and gas alarms.
• Dimensions: 1.9 × 3.3 × 5.3 inches.
• Weight: Approximately 18 ounces, including rechargeable battery.

Battery Information

• NiMH rechargeable battery: Operating time > 10 hours; charging time approximately 7 hours.
• Alkaline disposable batteries: Operating time > 17 hours.
• Internal memory/clock battery life: Greater than 5 years.

Approvals & Warranty

• Certifications: North America Class I, Division 1, Groups A, B, C, D (UL); Ex II 2G; EEx ia d IIC T4.
• Warranty: Two-year limited manufacturer’s warranty for the instrument; one year for the sensor cartridge.