Enforcer Calibration System (H-2302B0831) for Impact

Product details (archived)

The information below is retained for reference only. This item is discontinued and cannot be ordered.

Regulations require regular testing of gas monitoring equipment to ensure that the instrument will work as and when required. The Enforcer Calibration Accessory allows you to easily comply with regulations when using an Impact multigas monitor, without the need for costly test facilities or third parties.

‘Bump’ testing should be carried out before use of any portable gas detector. This involves exposing each gas sensor to a known concentration of target gas and ensuring that it responds correctly. If not, the unit must be re-calibrated or serviced to replace those parts not working.

Personal gas monitors are normally calibrated every 3 to 6 months. Typically this requires specialist knowledge and equipment that is costly, or the work is sub-contracted to a third party. During this time, instruments are not available for use and so could delay essential operations or force additional monitors to be purchased.

The Enforcer calibrates Impact multigas monitors fitted with oxygen, flammable, carbon monoxide and hydrogen sulfide sensors in less than two minutes. Volumes and flow rates are minimized to allow approximately 200 calibrations per cylinder of gas, making calibration as low in cost as a ‘Bump’ test. Impact instruments, when used with The Enforcer, are always available for use. Calibration results are recorded for printing at a later date via the optional PC software, thereby ensuring that instrument histories are always available if required.

Features:

• Convenient to Use
• Portable design
• Lightweight and compact
• Disposable multigas cylinder
• Wall mounting bracket with security fixing included

Easy to Operate

• Simple mechanical construction
• Attach the Impact
• Instrument is automatically recognized
• Press a single button to proceed
• Wait a minute
• Impact is now tested and calibrated
• Minimal training required

Minimize Running Costs

• No need for third parties
• Reduce instrument downtime
• Simplify operations

Easy to Maintain

• Durable plastic housing
• Wipe clean surfaces
• Replaceable gaskets and seals
• Built-in indicator tells you when gas needs replacing

Maintain Records

• Calibration history recorded by instrument
• Print history via optional PC software
• Ensure compliance with regulations

Please allow 7 to 10 days for delivery.