Copper in Water Test Kit 0-4 ppm (AQ-12065) Approximately 90 Tests
This item is No Longer Available
No Longer Available
Range: 0.25 PPM, 0.5 PPM, 1.0 PPM, 2.0 PPM, 4.0 PPM.
- Measures both
free and chelated copper
- Enough reagent
to perform approximately 90 tests
- Dropper bottle
for accurate dispensing of test solution
glass (flat bottom) test tube
- Snap tight
test tube cap
- Easy to follow
- Color chart to
Fill a clean test tube with 5ml of water to be tested (to the line on
Add 10 drops of test solution, holding dropper bottle upside down in a
completely vertical position to assure uniformity of drops added to the water
Cap the test tube and shake the tube for 5 seconds. Do not hold finger over the
open end of test tube, as this may affect test results.
Wait one minute for the color to develop.
Remove the cap. Hold the test tube upright over the white area on the color
chart and view the color of the solution by looking down from above through the
tube from top to bottom. Compare the color of the sample with the printed
Even a very faint color indicates the presence of copper. The closest color
match on the test chart indicates the total PPM of total copper (free and
chelated) in the water sample.