Meters, Test Kits, Inspection Supplies & Tools!

Lutron WA-2017SD Data Logging Water Analysis Meter Kit

Model #: WA-2017SD

UPC: 0681035014585

Condition: New

Regular Price: $419.95 $279.00

Add Qty to Cart:
Product 9 of 13
Category: Water Testing

The WA-2017SD Data Logging Water Analysis Meter Kit accurately measures Conductivity, Total Dissolved Solids TDS or Salt concentration of a liquid.

Optional probes allow meter to measure pH, ORP (Oxidation-Reduction Potential) and Dissolved Oxygen (DO). See below

  • Patented technique for storing sampled data, in common spreadsheet format, on a removable SD memory card.
  • Store and recall Maximum and minimum.
  • Embedded micro-controller: Custom one-chip LSI device.
  • Display type: LCD with green backlight.
  • Display dimensions: 2.05 x 1.5 inches (52 x 38mm).
  • Parameters measured: pH, ORP, conductivity, TDS content, DO content, salt content.
  • Measurement range:
    • Salt content: 12%.
    • Conductivity: 200 mS (millisiemens).
    • TDS: to 132,000 ppm.
    • When OPTIONAL Probes are used:
      • DO: 20 mg/L by weight.
      • pH: 0 to 14.
      • ORP: -1999 mV to 1999 mV.
  • Measurement accuracy:
    • For pH: (0.02 pH units + 2 digits).
    • For ORP: (0.5% of reading + 2 digits).
    • For conductivity: 2% of full-scale reading + 1 digit.
    • For TDS: 2% of full-scale reading + 1 digit.
    • For temperature: 0.8°/ 1.5°.
    • For DO: 0.4 mg/L in solution
    • For oxygen: 0.1% for oxygen in air
    • For salt: 0.5% of value
  • Measurement resolution:
    • For pH: 0.01 unit
    • For ORP: 1 mV
    • For conductivity: 0.1 µS @ 200 µS full-scale (f.s.), 0.001 mS @ 2 mS f.s., 0.01 mS @ 20 mS f.s., 0.1mS @ 200 mS f.s.
    • For TDS: 0.1 ppm @200 ppm f.s., 1 ppm @2,000 ppm f.s., 10 ppm @ 20,000 ppm f.s., 100 ppm @ 100,000 ppm f.s.
    • For temperature: 0.1°/0.1°
    • For DO: 0.1 mg/L in solution
    • For oxygen: 0.1% in air
    • For salt: 0.01% of reading
  • Temperature compensation:
    • Automatic: 32 to 150° F (0 to 65° C) when using optional ATC temperature probe.
    • Manual: 32 to 212° F (0 to 100° C) without ATC probe.
  • Data Logging Sampling Time: 1 second to 9 hours.
  • SD Card Capacity: 1 GB to 16 GB.
  • Settable Parameters: Date, time, auto power off, beep sound, sampling time, decimal point or comma decimal division, temperature unit, compensation temperature. Also salt and altitude compensation (DO mode only).
  • Operating temperature: 32 to 122° F (0 to 50° C).
  • Operating humidity: 0 to 85%.
  • Power supply: 6 AA batteries or optional 9vDC AC adapter.
  • Power Consumption:
    • 14 mADC (normal operation, with backlight off and SD card not saving data).
    • 37 mADC with backlight on and card saving data.
    • 49 mADC with backlight on and card saving data.
  • Dimensions: 6.97" x 2.68" x 1.77" (177 x 68 x 45mm).
  • Weight: 1.08pounds (489grams).

Supplied with:

  • Conductivity Probe (CDPB-03) with 9' Cable.
  • Carrying case CA-06.
  • Operation manual.

Optional items:

  • ATC temperature probe TP-07.
  • 4.0 buffer solution PH-04.
  • 7.0 buffer solution PH-07.
  • Conductivity/ TDS/ Salt probe: CDPB-04.
  • 1.413mS conductivity standard CD-14.
  • ORP probe ORP-14.
  • Dissolved oxygen probe OXPB-11.
  • Spare DO probe diaphragm OXHD-04.
  • DO probe electrolyte OXEL-03.

Lutron Certificate of Calibration

Search Category: Hardware > Tools

Product 9 of 13
Category: Water Testing
Manufacturers
Manufacturer Info
Lutron