UVC 254nm Ultra Violet Light Meter (UVC-254SD) Data Logging

Lutron UVC-254SD UVC Ultra Violet Light Meter with Real time Datalogging

High precision UVC measurement with Built-in Time/Date Stamp and real time data recorder (sampling time can be set at intervals of 1 second to 3600 seconds) and stored on optional SD memory card.

• Two ranges (1 milliwatts = 1 millijoules/second):
  • 2 mW/cm2.
  • 20 mW/cm2.
• Microprocessor circuit provides high reliability and durability. UVC, Short wave 254 nm ultra-violet irradiance measurement.
• 1 touch self calibration zero button.
• Datalogging is available in either automatic or manual mode.
• Real time SD memory card Datalogger, with Built-in Clock and Calendar (sampling times can be set from 1 second to 3600 seconds).
• Manual datalogger is also available (by setting the sampling time to 0).
• Computer is not needed to setup extra software, after recording with the datalogger, just insert the optional SD card into your computer card reader, then upload all of the measured values with the time & date information (year/month/date/hour/minute/second) into your favorite spreadsheet software (CVS) for further evaluation and reporting.
• Ultraviolet L-Sensor with cosine correction filter and has a heavy duty sensor structure with metallic housing case.
• Remote probe allows measurement at optimum positions.
• Tripod Mount & Self-storing easel back
• Data hold, memory with recall, records Maximum & Minimum reading
• Auto power off (can be disabled)
• RS-232 PC computer interface.
• SD card capacity : 1 GB to 16 GB.
• Display size: 2" x 1.5" (52 x 38mm) LCD with green backlight
• Spectrum range: 240 to 390nm.

Measurement ranges (auto switching) & resolution:

(1 milliwatts = 1 millijoules/second)

• Datalogger Sampling Time Setting range:
  • Automatic: 1 to 3600 seconds
  • Manual: Push the data logger button once to save one data point
• Advanced Setting Options:
  • Set clock time (Year/Month/Date, Hour/Minute/ Second)
  • Decimal point of SD card setting
  • Auto power OFF management
  • Set beep Sound ON/OFF
  • Set thermometer type to Type K or Type J
  • Set temperature unit to °C or °F
  • Set sampling time
  • SD memory card Format
• Temperature Measurement with ATC (can only be used when Light Probes are removed)
• Type K or Type J thermocouple connection

• Sampling Time: Approx. 1 second.
• Data Output: RS-232 and SD card
• Operating Temperature: 32° to 122°F (0 to 50°C
  NOTE most batteries are not rated for below -4° F or above 125° F
• Operating Humidity: Less than 85% RH
• Power Supply: (6) AA 1.5v Alkaline or equivalent. (optional 9vDC power adapter)
• Power Current:
  • approx. DC 6.5 mA: Normal operation (no DataLogging, with LCD Backlight OFF)
  • approx. DC 30 mA: DataLogging mode (with LCD Backlight OFF)
  • with LCD backlight on, the power consumption will increase by approx. 16 mA
• Weight: 1.08 lbs. (489g) meter only
• Dimensions:
  • Meter: 7" x 2.7" x 1.9" (177x68x45mm)
  • UVC Sensor: 0.7" diameter
    • Probe: 1.5" diameter x 1.1" (with 39" wire).
• COO: Taiwan.
• Harmonized code: 9027.80.90.

Supplied with:

• Instruction manual.
• UVC Probe.
• Hard carrying case (CA-06).
• Lutron factory calibration certificate.

Optional Accessories

• Light Probe Extension Cable EXCB-05.
• 16gB SD Memory Card.
• Lutron Data Acquisition Software for Windows SW-U801-WIN.
• Lutron Data Acquisition Software for Windows with Excel SW-E802.
• Lutron USB Data Acquisition Cable with Driver USB-01.
• USB to 9v DC power cable USBP-59.
• 110v AC to 9v DC adapter AP-9V110.
• 9 volt alkaline battery 522BP.

Applications include:

Low E, Dentistry, Monitoring blue light radiation hazards in welding, UV sterilization, Graphic Arts, Photochemical Matching, UV EPROM erasure, Photoresist exposure, curing of inks, adhesives and coatings.