Lutron Active-Wire Thermo-Anemometer (AM-4215SD) 40 to 3940 FPM

Lutron AM-4215SD Hot/Active-Wire Anemometer. Measures Air Speed & Air Flow

Hot/Active-Wire Anemometer, Complete with Hot/Active-Wire anemometer probe with integral humidity & Temp Sensors, built-in. Measures Air flow (CMM/ CFM), Humidity, Dew point & air temperature. Surface temperature can be measured with option type K/J Thermocouple Probes. 5 selectable measurement units include m/s, km/h, ft/min, knots & MPH.

• One meter can accept two Hot/Active-Wire anemometer probes.
• Combination of Hot/Active-Wire and Standard Thermistor, deliver rapid and precise measurements even at low air velocity value.
• Slim Hot/Active-Wire probe is ideal for grilles, plenums, vents, diffusers etc.
• Air velocity: m/s, Ft/min, Km/h, Knot, Mile/h,
• Air flow ( CFM, CMM ) measurement.
• Air temperature (°C,°F)
• Fast humidity measuring response time.
• Accepts Type K, Type J thermocouple temperature probes.
• Real time SD memory card Datalogger, Built-in Clock and Calendar, real time data recorder , sampling time set from 1 second to 3600 seconds.
• SD card capacity: 1 GB to 16 GB.
• LCD with green back-light.
• Auto power off (can be disabled).
• Automatic Temperature Compensation.
• Data Hold: Freeze the display reading.
• Memory Recall: Maximum & Minimum value.
• Microcomputer circuit provides very high accuracy.
• RS232/USB PC COMPUTER interface.

Specifications:

• Display: 52mm x 38mm LCD with green back light ( ON/OFF ).
• Air velocity:
  • m/s (meters per second):
    • 0.2 to 5.0 m/s.
    • 5.1 to 25.0 m/s.
  • Km/h (kilometers per hour):
    • 0.70 to 18.00 km/h.
    • 18.00 to 72.00km/h.
  • Ft/min (FPM, feet per minute):
    • 40-3940 ft/min.
  • Knots (nautical miles per hour):
    • 0.40 to 9.70 knots.
    • 9.7 to 38.8 knots.
  • Mile/h (mph, miles per hour):
    • 0.50 to 11.20 mph.
    • 11.2 to 44.7 mph.
  • Air flow:
    • Range:
      • CFM: 0 to 1,907,000.
      • CMM: 0 to 54,000.
  • Area:
    • CFM: 0.01 to 322.93 feet².
    • CMM: 0.001 to 30.000 m².
• Surface Temperature (optional):
  • Type K thermocouple: -58° to 2372° F (-50° to 1300° C).
  • Type J thermocouple: -58° to 2192° F (-50° to 1200° C).
• Air temperature: 32° F to 122° F (0° to 50° C).
• Sensor Structure:
  • Air velocity & Air flow: Tiny glass bead thermistor.
  • Air temperature: Thermistor.
  • Type K, Type J thermometer: Type K/J thermocouple probe.
• Datalogger Sampling Time Setting range:
  • Auto: 1 second to 3600 seconds
  • Manual: Push the data logger button once will save data one time.
• Memory Card: SD memory card. 1 GB to 16 GB.
• Advanced settings:
  • Set clock time ( Year/Month/Date,Hour/Minute/ Second )
  • Set sampling time
  • Auto power OFF management
  • Set beep Sound ON/OFF
  • Decimal point of SD card setting
  • SD memory card Format
  • Set thermometer type to Type K or Type J
  • Set temperature unit to °C or °F
  • Set air flow type ( CFM/USA, CMM/EURO )
  • Set air flow area dimension
• Sampling Time of Display: Approx. 1 second.
• Data Output: RS 232/USB PC computer interface.
• Power Supply:
  • 6 AA (1.5v) alkaline batteries or equivalent.
  • 110v AC to 9v DC adapter (optional).
• Power Current:
  • Normal operation ( w/o SD card saving data and LCD Back light OFF): Approx. DC 30 mA.
  • When SD card is saving data and LCD Back light is OFF): Approx. DC 50 mA.
• Operating Temperature: 32° F to 122° F (0° to 50° C).
  NOTE most batteries are not rated for below -4° F or above 125° F.
• Operating Humidity: less than 85% RH non-condensing.
• Weight: 12.4oz (347g) meter only.
• Dimensions:
  • Main instrument: 7.1" x 2.9" x 1.9" (182x73x47.5mm).
  • Active-Wire telescoping probe:
    • Diameter: 0.47" (12 mm) .
    • Min. length: 11" (280mm).
    • Max. length: 37" (940mm).

Supplied with:

• Instruction manual.
• (1) Hot/Active-Wire telescoping probe.
• Hard carrying case.

Optional Accessories

• 16gB SD Memory CardSD-16GB.
• USB to 9v DC power cableUSBP-59.
• 110v AC to 9v DC adapterAP-9V110.
• Data Acquisition Software for Windows SW-U801-WIN.
• Excel Data Acquisition software SW-E802
• USB Data Acquisition Cable with Driver USB-01.
• Type K thermocouple probes
• RS232 cable, UPCB-02.

Applications: Environmental testing, HVAC, Air conveyors, Flow hoods, Clean rooms, Air velocity, Air balancing, Fans/motors/blowers, Furnace velocity, Refrigerated case, Paint spray booths . measurements