| Circuit |
Custom single-chip microprocessor LSI circuit. |
| Display |
LCD size : 51 mm x 37 mm LCD with green back-light ( ON/OFF ). |
| Display units |
Air velocity : m/s, km/h, FPM, mph, knots Air pressure: psi, inch Hg, inch H2O, h PA, kPA mbar, Kg/cm2, mm Hg, meter H2O, Atmosphere. |
| Measurement Function |
Air velocity & Dual differential input, data hold,zero/relative, memory. |
| Zero adjust |
Push button on the front panel. |
| Sensor |
Sensor is built inside the housing. |
| Piezoelectric sensor. |
Used for dry, non-corrosive and non-ionic air and gas only. Not for use of Liquids. |
|
Datalogger Sampling
Time Setting range
|
Auto: 1 second to 8 hours, 59 minutes and 59 seconds. @ Sampling time can be set to 1 second. |
| Manual |
Push the data logger button once will save data one time. @ Set the sampling time to 0 second. @ Manual mode, can also select the 1 to 99 position ( Location ) number. |
| Data error no. |
0.1 % no. of total saved data typically. |
| Memory Card |
SD memory card. 1 GB to 16 GB. |
| Advanced settings |
- Set clock time (Year/Month/Date,Hour/Minute/ Second )
- Set sampling time
- Auto power OFF management
- Set beep Sound ON/OFF
- Decimal point of SD card setting
- SD memory card Format
- Air density setting
|
| Data Hold |
Freezes the display reading. |
| Memory Recall |
Maximum & Minimum value. |
| Sampling Time |
Approx. 1 second. |
| Data Output |
RS 232/USB PC computer interface. Connect the optional RS232 cable UPCB-02 will get the RS232 plug. Connect the optional USB cable USB-01 will get the USB plug. |
| Operating Temperature |
Meter: |
32° F to 122° F (0° to 50° C) |
| Operating Humidity |
Less than 85% R.H. |
| Power Supply |
Alkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 6 PCs, or equivalent. |
| DC 9V adapter input. ( AC/DC power adapter is optional ). |
| Power Current |
Normal operation ( w/o SD card save data and LCD Back-light is OFF) : Approx. DC 7 mA. |
| When SD card save the data and LCD Back-light is OFF) : Approx. DC 25 mA. |
| If LCD back-light on, the power consumption will increase approx. 10 mA. |
| Weight |
0.59 LB. (265 g). |
| Dimensions |
Meter: |
7.5" x 2.7" x 1.8" (190 x 68 x 45 mm). |