Lutron Infrared Thermometer 7:1 (TM-960) -22° to 581°F

Lutron Infrared Thermometer 7 to 1 (TM-960), −22°F to 581°F with Type K Probe Port

The Lutron TM-960 is a non-contact infrared thermometer designed for fast, safe, and accurate surface temperature measurements. It is ideal for diagnosing temperature issues on transformers, circuit breaker panels, motors, bearings, registers, ducts, steam lines, flues, and other surfaces. The integrated Type K thermometer port allows direct-contact temperature readings, making this a versatile 2-in-1 diagnostic tool that helps reduce risk of burns and speeds up troubleshooting.

• Two-in-one instrument: Infrared thermometer and Type K thermometer.
• Non-contact infrared measurement: Allows fast, safe surface temperature checks.
• Infrared thermometer features:
  • 0.95 default emissivity value.
  • Automatic display hold.
  • Safety LED red target guide.
• Automatic power shut-off to extend battery life.
• High-performance microcomputer circuit.
• Backlit LCD display.
• Threaded tripod mount for hands-free operation.
• Built-in low battery indicator.
• Compact housing with an integrated stand.
• Infrared temperature range: −22°F to 581°F (−30°C to 305°C).
• Infrared temperature resolution: 0.5°C.
• Type K temperature range: −200°C to 1300°C.
• Type K temperature resolution:
  • 0.1° at less than 1000°.
  • 1.0° at greater than 1000°.
• High-intensity LED target light for infrared guidance.
• Selectable °C or °F (°F is the default at power-on).
• Operating temperature: 32°F to 122°F (0°C to 50°C).
  NOTE: Most batteries are not rated for use below −4°F or above 125°F.
• Operating humidity: Less than 80 percent RH, non-condensing.
• Power: One 9 V alkaline battery or equivalent.
• Weight: Approximately 5.4 ounces (150 g) without battery.
• Dimensions: 6.3" × 3.6" × 1.8" (160 × 92 × 45 mm).