Lutron Pressure Meter (PS-9302)

Lutron Pressure Meter (PS-9302)

Features:

• Meter can cooperate with 2, 5, 10, 20, 50, 100, 400 bar sensor, new calibration are not necessary when change the new sensor .
• When change the new pressure sensor, just select pressure type ( 2, 5, 10, 20, 50, 100, 400 bar ) on the front panel button. The sensor type will memorize into the circuit permanently by EEPROM.
• 8 kind pressure units ( bar, psi, Kg/cm2 mm/Hg, inch/Hg, meter/H20, inch/H20, Atmosphere ) select by push button on the front panel
• Optional full line presssure sensor ( 2, 5, 10, 20, 50, 100, 400 bar ) are available.
• Auto shut off saves battery life.
• 4 pin DIN socket, 2 pins to provide DC 5 V exciting voltage ( power supply ) to pressure transducer, another two pins for accept transducer signal of 100mV full scale.
• Zero button on the front panel, easy adjust the zero value of pressure sensor.
• Push button gain adjustment, usage for calibration precisely if necessary.
• Separate pressure sensor, easy operation. & remote measurement.
• Microprocessor circuit assures maximum possible accuracy, provides special functions and features,
• Super large LCD display with contrast adjustment for best viewing angle.
• Records maximum & minimum readings with recall.