Lutron WA-2017SD Data Logging Water Analysis Meter Kit

Lutron WA-2017SD Data Logging Water Analysis Meter Kit accurately measures Conductivity, Total Dissolved Solids TDS or Salt concentration of a liquid. Supplied with CDPB-03 Conductivity Probe.

Supplied with:

• Conductivity Probe (CDPB-03) with 9' Cable.
• Carrying case CA-06.
• Operation manual.

Optional items:

• PE-03K7 Combination PH & Temperature probe (ATC).
• Heavy duty spear tip pH electrode probe PE-04HD.
• Epoxy coated heavy duty pH electrode probe PE-06HDA.
• PE-03 Standard pH electrode probe.
  • 4.0 buffer solution PH-04A.
  • 7.0 buffer solution PH-07A.
• Conductivity/ TDS/ Salt probe: CDPB-04.
  • 1.413mS conductivity standard CD-14.
• ORP probe ORP-14 1999 mV.
• Dissolved oxygen probe OXPB-11.
  • DO probe electrolyte OXEL-03.
• Automatic temperature compensation (ATC) temperature probe TP-07.

• USB to 9v DC power cable USBP-59.
• 110v AC to 9v DC adapter AP-9V110.
• Data acquisition software SW-U801-WIN.
• USB cable USB-01.
• SD card 16 GB capacity: SD-16GB.

Specifications:

• Patented technique for storing sampled data, in common spreadsheet format, on a removable SD memory card.
• Store and recall Maximum and minimum.
• Embedded micro-controller: Custom one-chip LSI device.
• Display type: LCD with green backlight.
• Display dimensions: 2.05 x 1.5 inches (52 x 38mm).
• Parameters measured: pH, ORP, conductivity, TDS content, DO content, salt content.
• Measurement range:
  • Salt content: 12%.
  • Conductivity: 200 mS (millisiemens).
  • TDS: to 132,000 ppm.
  • When OPTIONAL Probes are used:
  • DO: 20 mg/L by weight.
  • pH: 0 to 14.
  • ORP: -1999 mV to 1999 mV.
• Measurement accuracy:
  • For pH: (0.02 pH units + 2 digits).
  • For ORP: (0.5% of reading + 2 digits).
  • For conductivity: 2% of full-scale reading + 1 digit.
  • For TDS: 2% of full-scale reading + 1 digit.
  • For temperature: 0.8°/ 1.5°.
  • For DO: 0.4 mg/L in solution
  • For oxygen: 0.1% for oxygen in air
  • For salt: 0.5% of value
• Measurement resolution:
  • For pH: 0.01 unit
  • For ORP: 1 mV
  • For conductivity: 0.1 µS @ 200 µS full-scale (f.s.), 0.001 mS @ 2 mS f.s., 0.01 mS @ 20 mS f.s., 0.1mS @ 200 mS f.s.
  • For TDS: 0.1 ppm @200 ppm f.s., 1 ppm @2,000 ppm f.s., 10 ppm @ 20,000 ppm f.s., 100 ppm @ 100,000 ppm f.s.
  • For temperature: 0.1°/0.1°
  • For DO: 0.1 mg/L in solution
  • For oxygen: 0.1% in air
  • For salt: 0.01% of reading
• Temperature compensation:
  • Automatic: 32 to 150° F (0 to 65° C) when using optional ATC temperature probe.
  • Manual: 32 to 212° F (0 to 100° C) without ATC probe.
• Data Logging Sampling Time: 1 second to 9 hours.
• SD Card Capacity: 1 GB to 16 GB.
• Settable Parameters: Date, time, auto power off, beep sound, sampling time, decimal point or comma decimal division, temperature unit, compensation temperature. Also salt and altitude compensation (DO mode only).
• Operating temperature: 32 to 122° F (0 to 50° C).
• Operating humidity: 0 to 85%.
• Power supply: 6 AA batteries or optional 9vDC AC adapter.
• Power Consumption:
  • 14 mADC (normal operation, with backlight off and SD card not saving data).
  • 37 mADC with backlight on and card saving data.
  • 49 mADC with backlight on and card saving data.
• Dimensions: 6.97" x 2.68" x 1.77" (177 x 68 x 45mm).
• Weight: 1.08pounds (489grams).