Lutron Water Hardness Conductivity Meter (PWH-303) Remote Probe

Lutron Conductivity/ Water Hardness Meter & Thermometer with Remote CDPB-04 Probe.

Model PWH-303 Water Hardness, Pure Water Meter, measures the concentration of minerals, particularly calcium and magnesium, in water. Hard water is water that has a high mineral content, and it can cause a variety of problems, such as scaling in pipes and appliances, and reduced effectiveness of soaps and detergents. A digital water hardness meter can be used to determine the hardness of water in a home, business, or industrial setting, and can help determine the appropriate treatment for the water to make it more suitable for use. Digital water hardness meters are typically portable, easy to use, and can provide quick and accurate readings of water hardness.

• LCD with two lines that show hardness/conductivity and temperature value at same time.
• User Calibratable with Calibration Standard CD-14 (Download instructions).
• Measurement water conductivity: 0 to 1999 uS.
• Measurement water hardness: 0 to 1000 ppm.
• Resolution: 1uS or 1ppm.
• Accuracy: ± ( 2% FS + 1 digit ).
• Temperature measurement can be switched to °F or °C.
• Temperature compensation: automatic from 32 to 140°F (0 to 60°C), with temperature compensation factor variable between 0 and 5% per degree.
• IP67, waterproof and solids protection.
• Auto power off to save the battery life.
• Records max. and min. value with recall.
• Built-in temperature sensor, ATC enabled.
• Operating Temperature: 32° F to 122° F (0° to 50° C).
• Operating Humidity: less than 80% RH non-condensing.
• Power: (4) AAA alkaline batteries or equivalent.
• Sampling time: approximately 0.8 seconds.

Supplied with:

• Conductivity/ TDS/ Salt probe: CDPB-04.
• Operation Manual.
• Lutron Factory Calibration Card.

Optional items:

• Conductivity probe: CDPB-03.
• 1.413mS conductivity standard CD-14.
• Soft carrying case: CA-52.
• Hard carrying case: CA-06.